TIN KNOCKER 5 x 10 ft The Wizard HVAC Plasma Cutting System

• The Wizard plasma cutting system was developed specifically for the HVAC contractor/fabricator. It is designed to do all that a user could want and meet the user's budget. Nothing has been sacrificed except cost to our customer.
• Heavy duty 5' x 10', all welded steel construction capable of a 2000 lb load
  (full sheet of 1" plate)
• 2-1/2" x 60", 16 ga. slats for economical replacement
• Efficient down draft exhaust design, activated & deactivated automatically as cutting starts & stops
  
• Hinged clean out doors at both ends makes cleanout easy. Slat removal not necessary.
  
• Top quality Browning 3/4" rack & pinion drives
• The finest dual hardened and ground HIWIN#20 linear guide ways
• Heavy duty NEMA 34 motors that automatically square the gantry (a feature only found on the best cutting tables.)
• Direct drive, high torque motors to eliminate position error found on belt driven tables
• Solid 4" x 6" thick wall tube gantry. This light weight, rigid construction means less moving weight and maximum repeatability
  
• Gantry drive with 3/4" rack & pinion and dual hardened & ground HIWIN#15 linear guide ways
• Top quality motors and gears delivering position repeatability of approx. .0005"
• Gantry capable of speeds of 1000 IPM
• Precision Drop Head Control
• Torch crash protection.
• The Wizard plasma cutting system was developed specifically for the small to medium size HVAC contractor. The Wizard is a full featured machine with all the capabilities of the more expensive plasma cutting systems, but is affordably priced.
• MADE IN THE USA!
• SHOP data HVAC software
• Hypertherm torch
• Training Is Completed Online From the Factory