• Standard Industrial is 100% Owned, Operated and Manufactured In The U.S.A.
• All Components Readily Available From Your Local Suppliers
• Groove in Bed and Ram Clamps for American Style Tooling
• Typical 20-30 Year Lifetime
• Hydraulic Tonnage Control
• Full Tonnage throughout Stroke
• Counterbalance for Punching
• Typical +, - .001” Repeatability
• Full Tonnage across Bed and Ram
  
• Lifetime Telephone Support at No Charge
• (2) 24” Work Support Arms
• Manifold centralized lube system
• Hand/Foot sequence w/footswitch
• *Contact Sierra Victor Industries if overall heights are critical.
• *Bed heights can be lowered with full machine pits
• *Contact Sierra Victor Industries for specifications on other size brakes
• FOR MORE FEATURES: CLICK HERE

STANDARD EQUIPMENT:

• Easy to read mechanical ram level indicator and simple, precise ram level adjustment
• Counterbalance valve for punching and blanking to provide minimum shock
• Mechanical in-line depth stop to set the top limit, the speed change and a micrometer adjustable lower limit for the most precision bends
• All parts are readily available from your local suppliers-off the shelf parts for a lifetime
• All parts are listed in the press brake manual with detailed drawings and the original manufacturers part number so you can always find parts for your press brake
• Hydraulic reservoir with oil filter—Oil is not included
• Electric disconnect switch with magnetic starter—Simply run your power to the box
• Full tonnage the entire length of the bed and ram
• Full tonnage throughout the stroke—Full tonnage is developed anywhere in slow speed
• Both ends of ram tapped to accept your four way die lifters
• Incredibly simple and versatile hydraulic and electric controls
• Spring loaded die clamps for easy, quick die change
• Ram readily accepts standard or safety tang dies—Can optionally be fitted to accept European tooling
• Positive single cylinder hydra-mechanical drive system
• Electric anti-whip control for your operators safety
• Overload protection to avoid damaging the press brake
• Shock-less, quite operation
• Fully adjustable stroke, open height and speed change
• Extremely heavy duty, rigid, all steel unitized frame
• Lube fittings at all bearing points
• All liquid tight electrical components
• (2) 24" support/gauging arms
• Hydraulic pressure tonnage control with gauge
• Die groove in bed with set screws in front and rear of brake bed
• Portable 2 hand control station with normal-inch (jog) modes, E-stop and palm buttons
• All Standard Industrial press brakes are stringently designed to meet O.S.H.A and ANSI B11.3 standards as well come complete with J.I.C. type and U.L. listed electrical components

*Contact Sierra Victor Industries if overall heights are critical.
*Bed heights can be lowered with full machine pits
*Contact Sierra Victor Industries for specifications on other size brakes

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 5 YEAR – STANDARD Parts & Limited Labor

• Ram Control and Safety Systems:
• Hand/Foot Safety Sequence With Footswitch – System that allows the operator to use a footswitch after the ram hits the slow speed.
• Light Curtain Safety Barrier With Footswitch – Infrared light system that allows the use of a footswitch during all points of operation.
• Extra 2 Hand Control Station – Extra 2 hand pedestal station for 2 man control (one pedestal is standard).
• Extra Footswitch – For 2 man control in use with Hand/foot sequence or light curtain system.
• Low Speed Retract – Slows the return speed of the ram down considerably when handling heavy, long work pieces, recommended for large press brakes – Can be turned on/off for small work.
• 4 Position In-Line Depth Stop – Pre-set up to 4 different ram depths with micrometer precision and select all four ram depths from 4 position selector switch mounted on pedestal.
• Auto Return Of Ram – Ram automatically returns to top of stroke after completion of stroke.
• Adjustable Pressure Sensitive Ram Reversal – Protect dies and work-pieces by setting a maximum pressure and once the pressure is achieved, the ram reverses.
• Programmable Ram Control –Set the Up limit, Speed change, the Lower limit and many other features with a PLC (Y axis) control.
• Lube Systems:
• Manifold Centralized Lube System – All lube points are brought to a centralized location on the back of the brake for incredibly simple and fast maintenance.
• Automatic Lubrication System – All points are automatically lubricated with a powered pump through an air operated, timed system.
• Bed And Ram Extensions:
• 10" Wide x 10’ Long Removable Flanges For Bed And/Or Ram – 10" wide precision machined, removable bed and/or ram extensions x 10’ in length between the end frames (NOTE) Must be ordered with machining of bed and ram for flanges.
• Machining For 10" Wide x 10’ Long Removable Flanges – Precision machining to the bed and/or ram required to mount the machined flanges.
• Permanent Bed And Ram Flanges – Non-removable, permanent flanges for bed and/or ram used for wide dies and pressing applications (NOTE) Typical press brake tooling cannot be used w/ wide bed and ram.
• Horns For Bed And Ram – 12" long extensions of the bed and ram designed to lengthen the bed and ram but not the distance between housings.
• Other Available Options:
• Decompression System For Bottoming Applications – Reduces shock to hydraulic system that occurs during bottoming applications.
• Die Roll Bars For Four Way Dies – Convenient hooks in the ram that aid in turning four way dies.
• 24" T-Slot Support/Gauging Arms – Heavy duty T-slotted arms that provide support for work pieces and allow operators to set stops in t-slots for gauging purposes. Also available with scales.
• Drop Stops For T-Slot Support Arms – Gravity stops that allow operators to easily gauge material.
• 5/8" T-slot Across Front Edge Of Brake Bed – T-slot across edge of bed to move arms left to right.
• Extra Open Height – Increases the open height of ram (NOTE) Does not increase stroke length.
• Extra Stroke – Increases overall ram stroke (NOTE) Does not increase open height.
• Extra Throat Depth – Increases overall throat depth measured from the centerline of bed.
• Optional Controls and Gauging: CLICK HERE
• CROWNING SYSTEMS, TOOLING AND ACCESSORIES: CLICK HERE