Cart is empty
- Description
- This is a simple, easy to use3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming . The CNC system is built on the top quality SHARP vertical mills Model LMV, LMV-50 and LMV-49-DVS frame.
- (LMV-MP-3) 9 x 42” table, 11 x 25×5” travel, vari speed
- (LMV-50-MP-3) 9 x 50” table, 11 x 32 x 5” travel, vari speed
- (LMV-49-DVS-MP-3) 9 x 49” table, 11 x 31 x 5” travel, Digital Vari speed
- AcuRite Millpwr G2 CNC3 axes control (Longitudinal, Cross)
- G code and conversational type programming
- 3 axes precision ball screws
- Safety handwheels
- Auto lube system
- 3 axes Digital Readout System (table, saddle, quill)
- Millpwr G2 Turnkey CNC System w/Software and Hardware:
- Dimension Functions:
- ABS/INC, POLAR/CARTESIAN, INCH/METRIC.
- Programming:
- PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS)
- HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),
- CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE
- Special Features:
- CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.
- Run Options:
- SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.
- Calculator Functions:
- GEOMETRY, TRIG.
- HARDWARE
- Operator Console:
- EASY TO USE FORMAT. CONVERSATIONAL ENGLISH. THREE DIMENSIONAL HARD KEYS. 10” FLAT PANEL, COLOR LCD DISPLAY. REMOTE STOP/GO SWITCH.
- Controller Cabinet:
- HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.
- USB AND RS232 INTERFACE
- 1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS
- 115VAC – 20 AMPS
- Dimension Functions:
- Millpwr G2 2 axes CNC system
- 2 axes ball screws and servo drives
- Auto lube system
- 3 axes Digital Readout system
- Cross Way cove
- Manufacturer
- Specifications
- Options/Accessories
- Acu-Rite electrical edge finder
- 6” “Kurt” Vise with Swivel Base
- Drill chuck
- Sharp Power Kneel
- Coolant System with Chip Pan At Base
- Power Draw Bar
- R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”
- Clamping Kit (52 pcs/steel rack)
- Halogen Work light
- Riser block 6
- 440 V transformer
- 4th axes Digital Readout System (on knee)
- Custom Freight
SHARP LMV-MP-3 Series 9" x 42" - 50" 3-Axis CNC Vertical Knee Mills
STANDARD ACCESSORIES:
TEM: 9" x 42" - 50" CNC Vertical Knee Mills with 3-Axis
MANUFACTURER: SHARP
MODEL: LMV-MP-3 / LMV-49/DVS MP-3 / LMV-50/DVS MP-3
Manufacturer:
Sharp
Machine Type
Machine Category:
Mills
Machine Sub-Category:
Vertical Knee
Control:
CNC
Metalworking
Mill Capacity:
9" x 42"
MODEL
|
LMV-MP-3
|
|
CAPACITY |
Table Size |
9 x 42 in. |
T-slots (No., Size, Pitch) |
3, 5/8, 2.5 in. |
|
Table Travel : X Longitudinal |
25 in. |
|
Table travel : Y Cross |
11 in. |
|
Quill travel: Z Vertical |
5 in. |
|
Ram Travel |
12 in. |
|
Knee travel : Vertical |
16 in. |
|
Spindle Center to Column |
6.75 - 18.5 in. |
|
Spindle Nose to Table Top |
2.12 - 18 in. |
|
HEAD, SPINDLE |
Spindle Nose Taper |
R-8 |
Spindle Variable Speed Range |
60 - 4500 rpm |
|
Spindle Motor (220V/440V) |
3 HP |
|
Quill Feed (Inch/Min)(3 speeds) |
.0015,.003, .006 in. |
|
Head Tilt Angle (L/R) |
45° |
|
Head Tilt Angle (Up/Down) |
45° |
|
GENERAL |
Floor Area (W x D x H) |
7.25 x 5.33 x 7 ft. |
Approximate Weight |
3,200 lbs. |
|
Power Consumption (220V) |
3 KVA/15 amps |
|
Power Consumption (440V) |
3 KVA/7.5 amps |
MODEL
| LMV-49/DVS MP-3
| |
CAPACITY | Table Size | 9 x 49 in. |
T-slots (No., Size, Pitch) | 3, 5/8, 2.5 in. | |
Table Travel : X Longitudinal | 31 in. | |
Table travel : Y Cross | 11 in. | |
Quill travel: Z Vertical | 5 in. | |
Ram Travel | 12 in. | |
Knee travel : Vertical | 16 in. | |
Spindle Center to Column | 6.75 - 18.5 in. | |
Spindle Nose to Table Top | 2.12 - 18 in. | |
HEAD, SPINDLE | Spindle Nose Taper | R-8 |
Spindle Variable Speed Range | 60 - 4500 rpm | |
Spindle Motor (220V/440V) | 3 HP | |
Quill Feed (Inch/Min)(3 speeds) | .0015,.003, .006 in. | |
Head Tilt Angle (L/R) | 45° | |
Head Tilt Angle (Up/Down) | 45° | |
GENERAL | Floor Area (W x D x H) | 7 x 6.5 x 7 ft. |
Approximate Weight | 2,700 lbs. | |
Power Consumption (220V) | 3 KVA/15 amps | |
Power Consumption (440V) | 3 KVA/7.5 amps |
MODEL | LMV-50/DVS MP-3
| |
CAPACITY | Table Size | 9 x 50 in. |
T-slots (No., Size, Pitch) | 3, 5/8, 2.5 in. | |
Table Travel : X Longitudinal | 32 in. | |
Table travel : Y Cross | 11 in. | |
Quill travel: Z Vertical | 5 in. | |
Ram Travel | 12 in. | |
Knee travel : Vertical | 16 in. | |
Spindle Center to Column | 6.75 - 18.5 in. | |
Spindle Nose to Table Top | 2.12 - 18 in. | |
HEAD, SPINDLE | Spindle Nose Taper | R-8 |
Spindle Variable Speed Range | 60 - 4500 rpm | |
Spindle Motor (220V/440V) | 3 HP | |
Quill Feed (Inch/Min)(3 speeds) | .0015,.003, .006 in. | |
Head Tilt Angle (L/R) | 45° | |
Head Tilt Angle (Up/Down) | 45° | |
GENERAL | Floor Area (W x D x H) | 7 x 6.5 x 7 ft. |
Approximate Weight | 3,000 lbs. | |
Power Consumption (220V) | 3 KVA/15 amps | |
Power Consumption (440V) | 3 KVA/7.5 amps |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
