Cart is empty
- Description
- The CPO 315 HFA-CNC saw is fully programmable so every cut length is fast and accurate. It uses a 30" linear actuator, driven by a servo motor. With its 12-1/2" blade, it allows you to cut up to 3-1/2" diameter tube or pipe and up to 1-3/4" solid material, while maintaining a length tolerance of +or- .006" per index and has a squareness tolerance of +or- .002" per diameter inch.
- The CPO 315 HFA-CNC's standard features include a large 10" touch screen control, an unlimited length setting with a 30" single length shuttle and a variable speed control. The setup to change to a different part length takes only a few seconds, plus the first part cut is always accurate. This saw has the ability to program a set length with a specific number of pieces or enter up to four separate lengths and amounts to be cut in sequence. This American-made machine is available in 230 or 460 volt configurations and is backed by Scotchman Industries' Best-in-the-Business, 2-year warranty
- Fully Automatic Cylce
- Touch Screen Controls
- 5 HP Variable RPM Speed Control (Ferrous Model)
- Interlocking Safety Hood
- Clamping both Sides of Blade--Highest Quality, Burr-free Cuts
- Blade Guides for Accurate Tolerances (Ferrous Model)
- Mist Coolant
- Adjustable Stroke Control on the Saw Head
- Adjustable Down Feed Control on the Saw Head for Feed Rate
- Fast Length Setup
- No Wrenches required to Set Length
- Adjustable Indexing Feed Speeds
- Program up to Four Separate Cut Lengths in each Job
- 100 Program Job Storage
- 30" Shuttle Length
- Unlimited Shuttles
- Piece Counter
- One Saw Blade
- One Gallon Concentrated Coolant (Ferrous Model)
- One Gallon Coolant (Non-ferrous Model)
- Made in USA
- Manufacturer
- Specifications
- Options/Accessories
- 10' & 20' Material Supply Track
- Form Jaws for Multiple Tubes
- Flood Coolant
- Custom Freight
SCOTCHMAN 12-1/2 inch Automatic CNC Cold Saw CPO 315 HFA CNC
ITEM: 12-1/2" Automatic CNC Cold Saw
MANUFACTURER: SCOTCHMAN
MODEL: CPO 315 HFA CNC / CPO 315 HFA CNC NF
Manufacturer:
Scotchman
Machine Type
Machine Category:
Saws
Machine Sub-Category:
Cold/Circular
Control:
CNC
Metalworking
Saw Capacity:
12"+
MODEL |
CPO 315 HFA CNC |
CPO 315 HFA CNC NF |
|
Cutting Speeds Based on Mild Steel |
Variable Speed 11 to 177 rpm |
3,000 rpm |
|
Motor Rate |
5 HP |
||
Cutting Capacities Based on Mild Steel: TUBING |
Round |
Up to 3-1/2" ( ≤ 89 mm) |
|
Square |
Up to 3-1/8" x 3-1/8" ( ≤ 79 mm) |
||
Cutting Capacities Based on Mild Steel: SOLID |
Round |
Up to 1-3/4" ( ≤ 44.5 mm) |
|
Square |
Up to 1-1/2" x 1-1/2" ( ≤ 37 x 37 mm) |
||
Length Tolerance |
+ or - 0.006" per index |
||
Squareness Tolerance |
+ or - 0.002" per diameter inch |
||
Motor HP Ferrous Models |
5 HP |
||
Power Supply |
208/230/460V, 3 Ph (must specify voltage) |
||
Air Pressure |
90 lbs. Minimum |
||
Maximum Saw Blade Diameter |
12-1/2" (315mm) |
||
Arbor Bore Size |
40mm |
||
Pin Spacing |
4/12/64 |
||
Dimensions |
L- 72" x W-44" x H-64" |
||
Shipping Weight |
1,770 lbs. (802 kg) |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 2 YEAR – Parts