- Description
- Manufacturer
- Specifications
- Options/Accessories
- 1791207 - 1/4" Router Collet for PM2700 Shaper: $149.99
- 1791208 - 1/2" Router Collet for PM2700 Shaper: $149.99
- 1791205 - 1" Spindle for PM2700 Shaper: $219.99
POWERMATIC TS29 Shaper, 7.5HP 3PH 230/460V PM9-1791284
The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.
STOCK#
|
PM9-1791284
|
MODEL
|
TS29
|
Spindle Speed (RPM)
|
3,000, 4,000, 6,000, 8,000, 10,000
|
Maximum Spindle Diameter (In.)
|
1-1/4
|
Spindles Included
|
3/4, 1, 1-1/4
|
Spindle Size Under Nut (In.)
|
3/4 (3-1/2), 1 (6), 1-1/4 (6-1/2)
|
Spindle Travel (In.)
|
7
|
Spindle Tilt (Deg.)
|
45 Forward, 5 Back
|
Reversible
|
Yes
|
Router Bit Collet Included
|
1/4, 1/2
|
Maximum Diameter Cutter Above Table (In.)
|
12
|
Maximum Diameter Cutter Below Table (In.)
|
9
|
Table Inserts (In.)
|
2-1/5, 5-1/2, Oval (Tilting)
|
Table Size (In.)
|
51-1/2 x 33-1/2
|
Table Travel (In.)
|
49-1/4
|
Sliding Table Size (In.)
|
11-1/4 x 51-1/4
|
Fence Size (L x H) (In.)
|
46 x 5
|
Fence Travel (Major and Minor) (In.)
|
5-3/8, 3-5/8
|
Dust Port Outside Diameter (In.)
|
5 (x2)
|
Dust Collection Minimum CFM Required (CFM)
|
800
|
Electrical Controls
|
24 volt
|
Motor Power (HP)
|
7-1/2
|
Motor Phase
|
3
|
Motor Voltage (V.)
|
230/460
|
Prewired Voltage (V.)
|
230
|
Recommended Circuit Size (Amps.)
|
30/15
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 5 YEAR (for Private Use) / 2 YEAR (for Commercial Use)