Cart is empty
- Description
- Manufacturer
- Specifications
POWERMATIC OES9138 Oscillating Edge Sander, 3HP 1PH 230V PM9-1791282
The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.
ITEM: 9" x 138-3/4" Oscillating Edge Sander
MANUFACTURER: POWERMATIC
MODEL: OES9138
PART# PM9-1791282
Manufacturer:
Powermatic
Machine Type
Machine Category:
Sanders
Machine Sub-Category:
Edge
Material Type:
Wood
|
STOCK#
|
PM9-1791282
|
|
MODEL
|
OES9138
|
|
Style (Type)
|
Horizontal/Vertical Oscillating Edge
|
|
Sanding Belt Size (L x W) (In.)
|
9 x 138-3/4
|
|
Belt Speed (FPM)
|
3542
|
|
Drum Diameter (In.)
|
4 Outboard, 9 Drive
|
|
Platen Size (In.)
|
9-1/2 x 48
|
|
Oscillations Per Minute
|
24
|
|
Main Table Size (L x W) (In.)
|
48 x 11-3/4
|
|
Main Table Tilt (Deg.)
|
5 In, 45 Out
|
|
Table Height from Floor (In.)
|
34-1/2 - 40-3/4
|
|
End Table Size (In.)
|
18
|
|
End Table Tilt (Deg.)
|
40 In, 45 Out
|
|
Electrical Controls
|
Magnetic Starter
|
|
Dust Collection Minimum CFM Required (CFM)
|
1,100
|
|
Dust Port Outside Diameter (In.)
|
4
|
|
Motor Power (HP)
|
3
|
|
Motor Phase
|
1
|
|
Motor Voltage (V.)
|
230 only
|
|
Recommended Circuit Size (Amps.)
|
30
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 5 YEAR (for Private Use) / 2 YEAR (for Commercial Use)
