- Description
- Manufacturer
- Specifications
POWERMATIC DDS-225 Drum Sander, 5HP 1PH 230V PM9-1791290
Finally, a production class Dual Drum Sander that is loaded with features. This machine features a 5HP motor to power the twin poly V-belts. The dual steel drums have a hard durometer rubber coating to assure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.
Maximum Board Width
|
25"
|
Minimum Board Length
|
9"
|
Maximum Board Thickness
|
5-1/4"
|
Minimum Board Thickness
|
1/32"
|
Drum Diameter
|
6"
|
Sanding Drums (number of drums)
|
2
|
Drum Length
|
25"
|
Drum Speed
|
1,700 RPM
|
Conveyor Motor
|
1/4 HP
|
Dust Port Outside Diameter
|
4"
|
Dust Collection Minimum CFM Required
|
600 cu.ft/min
|
Electrical Controls - Magnetic Starter
|
230 V Magnetic
|
Motor
|
5 HP, 1 Ph
|
Motor Voltage
|
230V
|
Dimensions ( L / W / H ) (in.)
|
43 x 44 x 43
|
Net Weight ( lb. )
|
730
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 5 YEAR – Limited