KALAMAZOO 4x36 in. Table Sander S4

• The S4 4 x 36 inch table sander is a powerful and versatile tool that can handle a wide range of tasks, from deburring and flattening to cleaning up workpieces.
• Motor specifications: 1/2 HP 1 phase 115V.
• Belt size specifications: 4" x 36"
• Two-position sander head (vertical and or horizontal).
• Adjustable and replaceable steel work table:
• Work table size: 5" x 2.5" D. Adjustable to 20° up and 45° down.
• Cast iron platen.
• Preset spring belt tension.
• Sealed bearings in idler pulley.
• Cast iron yoke
• Heavy-duty construction.
• Easy to track sanding belt.
• Umbrella guard
• Quick belt change
• Sanding Methods:
  • Stock Removal and Shaping
  • Smoothing and Leveling
  • Finishing and Polishing
  • Finishing and Polishing
  • Freehand Sanding
  • And much more…
• Materials the S4 4 x 36 Inch Industrial Sander Can Handle:
• Wood:
  • Softwoods: Pine, spruce, cedar, fir (use finer grits for smoother finish)
  • Hardwoods: Oak, maple, cherry, walnut (use appropriate grits for desired finish)
  • Plywood: Veneered and unfinished plywood (beware delamination with aggressive grits)
  • Veneers: Thin wood layers for furniture and cabinets (use extreme caution, fine grits only)
  • MDF and particle board: Common for furniture and cabinets (test on scrap piece first)
• Metal:
• Steel: Mild steel, galvanized steel, stainless steel (use specific metal sanding belts)
• Aluminum: Common for building materials and tools (use specific metal sanding belts)
• Brass and other non-ferrous metals: Soft and malleable, use caution and fine grits
• Cast iron: Rough surface, use coarse grits, wear gloves and eye protection
• Other Materials:
• Plastics: Many types like HDPE, PVC, etc. (test on scrap piece first, use appropriate grit)
• Fiberglass: Use caution and specific sanding belts to avoid damaging the resin
• Composites: Some composites like carbon fiber can be sanded, research specific recommendations
• Leather: Smoothing and shaping edges, use fine grits and light pressure
• Always remember:
  • Test on scrap material first! Different materials require different grits and techniques.
  • Use the right sanding belt. Each material has specific needs, avoid cross-contamination
  • Wear appropriate safety gear: Gloves, eye protection, dust mask.
  • Start with a lower grit and work your way up.
  • Be mindful of the pressure you apply. Too much pressure can damage the material or the sander.
• Where Can You Use This Sander?
  • The Kalamazoo Industries S4 4 x 36 inch table sander is a compact and powerful tool that can be used in workshops of all sizes, even those with limited space.