KALAMAZOO 20 inch Disc Sander DS20

• The DS20 20 inch disc sander was designed to flatten, debur, bevel and round ends on ferrous, non-ferrous metals and non-metals such as wood and pvc. This disc sander will accommodate any PSA adhesive disc so you can achieve your desired finish.
• DS20 20 inch industrial disc sander either comes standard with a powerful 1.5 or 2HP motor, adjustable (up and down and tilts 45 degrees down) cast iron work table (45 to 90 degrees) with .75" slot, cast iron base, cast aluminum guard, drum switch.
• 2 HP, 3 PH, (220/440V) or 1-1/2 HP, 1 PH (220V ONLY)
• 20" dia. steel disc, uses PSA adhesive sanding discs, 1 included.
• Reversing drum switch.
• Tilt table with mitre gauge, tilts 45 degrees down, raises and lowers 6"
• Import iron, USA motors, electrics.
• Made in the USA
• THIS INDUSTRIAL DISC SANDER CAN DO BUT NOT LIMITED TO THE FOLLOWING SANDING APPLICATIONS:
  • Bevel and deburr
  • Round an end
  • Square and end
  • Flattening
• THIS INDUSTRIAL DISC SANDER IS DESIGNED TO SAND THE FOLLOWING:
  • Steel
  • Cast Iron
  • Aluminum
  • Brass
  • Bronze
• WHERE CAN THIS INDUSTRIAL DISC SANDER BE USED:
  • DS20 20 inch vertical heavy duty disc sander has applications in the following industries: energy, oil/natural gas, petro/chemical, knife manufacturing, automotive, metal foundries, as well as many other manufacturing and fabrication environments.