Cart is empty
We Are an Authorized HE&M Distributor in the Following States: FL, GA, NC, SC, VA
- Description
- The VT100LM-60 will miter up to 60° in both directions. A self-contained hydraulic system powers the full stroking vise, arm tilt, and guide arm. Functions are operated from a touch screen control and the saw can be operated in manual or semi-automatic modes. Various options are available.
- Control Console w/ 7" Touch Screen
- 4° Removable Arm Cant
- Powered Tilt w/ Angle Readout on Touch Screen
- Vise - Full Stroking Main
- Adjustable Clamping Force
- Carbide Blade Guides
- Guide Arm - Powered
- Variable Blade Speed w/ Readout on Touch Screen
- Air Powered Blade Tension
- Adjustable Feed Rate
- Adjustable Cutting Pressure
- Forward Cut Stop
- Coolant System - Flood w/ Wash-Down Hose
- Boltable Side Wings for Coolant Drainage
- Blade Brush
- Broken Blade Function
- Blade Change Interlock
- Safety Guards
- 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
- 85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)
- Manufacturer
- Specifications
- Options/Accessories
- Vise - 2nd Main
- Swing-Away Top Clamp - Main Vise
- Power Programmable Tilt from Touch Screen
- Passive "Cut Watcher" System
- Laser Light System
- 12" H Wear Plates - Non Mitered
- Right to Left Feed Direction
- Spray Mist Lubrication
- Pedestal Mounted Control Console
- 5' Roller Load Table
- 10' Idle Roller Load Table
- 5' Roller Discharge Table
- 10' Roller Discharge Table
- 5' Idle Roller Stock Table
- 10' Idle Roller Stock Table
- Custom Freight
HE&M 18 inch Vertical Tilt-Frame Production Bandsaw VT100LM-60
ITEM: 18" x 20" Vertical Tilt-Frame Production Bandsaw
MANUFACTURER: HE&M
MODEL: V/VT 100 SERIES
PART# VT100LM-60
Manufacturer:
HE&M
Machine Type
Machine Category:
Bandsaws
Machine Sub-Category:
Production
Position:
Vertical
Metalworking
Saw Capacity:
18"+
Capacity |
Rectangular |
0-18" W x 0-20.75" H |
Square |
0-18" (Square) |
|
Round |
0-18" (Diameter) |
|
Bar-feed |
N/A |
|
Motor |
5 HP |
|
Hydraulic Motor |
N/A |
|
Operation Type |
Semi-Automatic |
|
Power Source |
Air |
|
Blade Type |
Bandsaw |
|
Blade Size |
15' 6" L x 1.25" H x .042" |
|
Cantilever |
Removable |
|
Bandsaw Blade Speed |
N/A |
|
Bundle Cut? |
Yes |
|
Weight |
N/A |
|
Electrical Motor Requirement |
220V/3PH or 440V/3PH (This is Not a Dual Voltage Machine) |
|
Minimum Air Requirement (Equipped w/ Air Filter/Lubricator) |
85 PSI, 4-6 CFM |
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
