Cart is empty
We Are an Authorized HE&M Distributor in the Following States: FL, GA, NC, SC, VA
- Description
- The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, allows the operator to enter an angle and the arm will travel to that position and stop.
- Swing-Away Control Console w/ 7" Touch Screen
- Powered Programmable Tilt w/ Angle Readout
- Vise - Full Stroking Main
- Adjustable Clamping Force
- Carbide Blade Guides
- Guide Arm - Powered
- Variable Blade Speed w/ Readout on Touch Screen
- Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
- Idle Base Rollers - 1 Each Side of Base
- Powered Blade Tension
- Forward Cut Stop
- Coolant System - Flood w/ Wash-Down Hose
- Blade Brush
- Broken Blade Function
- Blade Change Interlock
- Safety Guards
- 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
- Manufacturer
- Specifications
- Options/Accessories
- Swing-Away Top Clamp - Main Vise
- Top Clamp - Reduced Capacity Main Vise
- Vise - 2nd Main
- Material List w/ Larger 8" Touch Screen
- Passive "Cut Watcher" System
- Laser Light System
- Power Raised Lift Up Rollers
- Chip/Swarf Removal System - Chip Conveyor
- Chip/Swarf Removal System - Manual Hand-Crank Chip Conveyor
- Spray Mist Lubrication
- Pedestal Mounted Control Console
- 5' Roller Load Table
- 10' Idle Roller Load Table
- 10' Powered Roller Load Table
- 5' Roller Discharge Table
- 10' Roller Discharge Table
- 10' Powered Roller Discharge Table
- 5' Idle Roller Stock Table
- 10' Idle Roller Stock Table
- 10' Powered Roller Stock Table
- Custom Freight
HE&M 24 inch Semi-Automatic Vertical Bandsaw V140HM-60-CTS
ITEM: 24" Semi-Automatic Vertical Bandsaw
MANUFACTURER: HE&M
MODEL: V/VT 100 SERIES
PART# V140HM-60-CTS
Manufacturer:
HE&M
Machine Type
Machine Category:
Bandsaws
Machine Sub-Category:
Production
Control:
Semi-Automatic
Position:
Vertical
Metalworking
Saw Capacity:
24"+
Capacity |
Rectangular |
0-24" W x 0-31" H |
Square |
0-24" (Square) |
|
Round |
0-24" (Diameter) |
|
Bar-feed |
N/A |
|
Motor |
10 HP |
|
Hydraulic Motor |
5 HP |
|
Operation Type |
Semi-Automatic |
|
Power Source |
Hydraulic |
|
Blade Type |
Bandsaw |
|
Blade Size |
20' 0" L x 1.5" H x .050" |
|
Cantilever |
Fixed |
|
Bandsaw Blade Speed |
N/A |
|
Bundle Cut? |
Yes |
|
Weight |
N/A |
|
Electrical Motor Requirement |
220V/3PH or 440V/3PH (This is Not a Dual Voltage Machine) |
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
