Cart is empty
We Are an Authorized HE&M Distributor in the Following States: FL, GA, NC, SC, VA
- Description
- V100HLA-3HC-CTS is a “high column” version of the VT100HLA. It has an expanded height capacity of 31” at 90ᵒ which allows an 18” capacity for 45ᵒ cuts. It is equipped with a 48” bar-feed that is capable of multiple indexes controlled by touch-screen control. Two vises are included.
- Swing-Away Control Console w/ 8" Touch Screen
- Computer Controlled Feed System
- Power Programmable Tilt from Touch Screen
- Vise - Full Stroking Main & Feed
- Adjustable Clamping Force
- Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
- Variable Blade Speed w/ Readout on Touch Screen
- Guide Arm - Powered
- Powered Blade Tension
- Passive "Cut Watcher" System
- Idle Base Rollers - 1 Each Side of Base
- Coolant System - Flood w/ Wash-Down Hose
- Boltable Side Wings for Coolant Drainage
- Blade Brush
- Broken Blade Function
- Out-of-Stock Function
- Blade Change Interlock
- Safety Guards
- 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
- Manufacturer
- Specifications
- Options/Accessories
- Swing-Away Top Clamp - Main Vise
- Top Clamp - Full Capacity Feed Vise
- Top Clamp - Reduced Capacity Main Vise
- Top Clamp - Reduced Capacity Feed Vise
- Vise - 2nd Main
- Vise - 3rd on Feed
- Power Raised Lift Up Rollers
- Laser Light System
- Right to Left Feed Direction
- Spray Mist Lubrication
- Pedestal Mounted Control Console
- Cold Weather Package
- Hydraulic Tank Heater
- 5' Roller Discharge Table
- 10' Roller Discharge Table
- 5' Roller Stock Table
- 10' Idle Roller Stock Table
- Custom Freight
HE&M 18 inch Automatic Vertical Bandsaw V100HA-HC-CTS
ITEM: 18" Automatic Vertical Bandsaw
MANUFACTURER: HE&M
MODEL: V/VT 100 SERIES
PART# V100HA-HC-CTS
Manufacturer:
HE&M
Machine Type
Machine Category:
Bandsaws
Machine Sub-Category:
Production
Control:
Automatic
Position:
Vertical
Metalworking
Saw Capacity:
18"+
Capacity |
Rectangular |
0-18" W x 0-31" H |
Square |
0-18" (Square) |
|
Round |
0-18" (Diameter) |
|
Bar-feed |
0-48" (Stroke Hydraulic Motor - Multiple Index) |
|
Motor |
15 HP |
|
Hydraulic Motor |
5 HP |
|
Operation Type |
Automatic |
|
Power Source |
Hydraulic |
|
Blade Type |
Bandsaw |
|
Blade Size |
16' 6" L x 1.25" H x .042" |
|
Cantilever |
— |
|
Bandsaw Blade Speed |
N/A |
|
Bundle Cut? |
Yes |
|
Weight |
N/A |
|
Electrical Motor Requirement |
220V/3PH or 440V/3PH (This is Not a Dual Voltage Machine) |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts