Cart is empty
We Are an Authorized HE&M Distributor in the Following States: FL, GA, NC, SC, VA
- Description
- The H130M-DC is operated using a touch screen control mounted in a swing-away console and can be operated in manual or semi-automatic modes. Full stroking variable-pressure vise and powered guide arm are standard along with other features. Many options are available.
- Swing-Away Console - Semi-Automatic Control
- 24" Solid Discharge Table
- Vise - Full Stroking Main
- Adjustable Clamping Force
- Carbide Blade Guides
- Lead In/Lead Out Roller Guides
- Guide Arm - Powered
- Powered Blade Tension
- Variable Blade Speed w/ Readout on Touch Screen
- Adjustable Feed Rate
- Adjustable Cutting Pressure
- Coolant System - Flood w/ Wash-Down Hose
- Blade Brush
- Broken Blade Function
- Safety Guards
- 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
- Manufacturer
- Specifications
- Options/Accessories
- Top Clamp - Full Capacity Main Vise
- Top Clamp - Full Capacity Outboard Vise
- Vise - Outboard Powered on Discharge
- Chip/Swarf Removal System - Chip Auger
- Passive "Cut Watcher" System
- Laser Light System
- Pedestal Mounted Control Console
- Free-Standing Control Console
- Hydraulic Tank Heater
- Cold Weather Package
- Spray Mist Lubrication
- 10' Powered Roller Load Table
- 5' Discharge Table Extension
- 10' Discharge Table Extension
- 10' Powered Discharge Table Extension
- 5' Idle Roller Stock Table
- 10' Idle Roller Stock Table
- 10' Powered Roller Stock Table
- Custom Freight
HE&M 20 inch Semi-Automatic Dual Column Bandsaw H130M-DC
ITEM: 20" Semi-Automatic Dual Column Bandsaw
MANUFACTURER: HE&M
MODEL: DUAL COLUMN SERIES
PART# H130M-DC
Manufacturer:
HE&M
Machine Type
Machine Category:
Bandsaws
Machine Sub-Category:
Dual Column
Control:
Semi-Automatic
Power Source:
Hydraulic
Position:
Horizontal
Metalworking
Saw Capacity:
20"+
Capacity |
Rectangular |
0-20" W x 0-20" H |
Square |
0-20" (Square) |
|
Round |
0-20" (Diameter) |
|
Bar-feed |
N/A |
|
Motor |
10 HP |
|
Hydraulic Motor |
2 HP |
|
Electrical Motor Requirement |
220V/3PH or 440V/3PH (This is Not a Dual Voltage Machine) |
|
Operation Type |
Semi-Automatic |
|
Power Source |
Hydraulic |
|
Blade Type |
Bandsaw |
|
Blade Size |
19' 0" L x 1.5" H x .050" |
|
Cantilever |
— |
|
Bandsaw Blade Speed |
N/A |
|
Bundle Cut? |
No |
|
Weight |
N/A |
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
