Cart is empty
We Are an Authorized HE&M Distributor in the Following States: FL, GA, NC, SC, VA
- Description
- The Cyclone A-4 makes cutting 45° miter cuts in one direction perfect for cutting small solids and shapes. With a 24" indexing bar-feed and up to 4 indexes, cutting multiple parts in longer than 24" in automatic mode is possible. A variety of options are also available.
- Easy View Console - All Function Control
- 18" Discharge Support
- Vise - Adjustable Main & Feed
- Adjustable Clamping Force
- 2 Hold Down Fixtures
- Vertical Alignment Bar on Bar-Feed
- Guide Arm - Manual Adjustment
- Passive "Cut Watcher" System
- Variable Blade Speed w/ LED Readout
- Carbide Blade Guides
- Manual Blade Tension
- Adjustable Feed Rate
- Adjustable Cutting Pressure
- Coolant System - Flood w/ Wash-Down Hose
- Blade Brush
- Broken Blade Function
- Out-of-Stock Function
- Safety Guards
- 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
- 85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)
- Manufacturer
- Specifications
- Options/Accessories
- Top Clamp - Reduced Capacity Main Vise
- Top Clamp - Reduced Capacity Feed Vise
- Full Width Discharge Plate
- Vise - 3rd on Feed
- 60° Miter Capability (Manual Cut Only)
- Laser Light System
- Powered Blade Tension
- Light Clamping Pressure
- Spray Mist Lubrication
- 5' Idle Roller Stock Table
- Single-Phase Voltage
- 10' Idle Roller Stock Table
- Custom Freight
HE&M 22 x 16 inch Horizontal Pivot Bandsaw CYCLONE A-4
ITEM: 22" x 16" Horizontal Pivot Bandsaw
MANUFACTURER: HE&M
MODEL: CYCLONE SERIES
PART# CYCLONE A-4
Manufacturer:
HE&M
Machine Type
Machine Category:
Bandsaws
Machine Sub-Category:
Miter
Position:
Horizontal
Metalworking
Saw Capacity:
22" x 16"
Capacity |
0-22" W x 0-16" H |
Bar-feed |
0-24" (Stroke Air - 4 Index) |
Motor |
7.5 HP |
Hydraulic Motor |
N/A |
Electrical Motor Requirement |
220V/3PH or 440V/3PH (This is Not a Dual Voltage Machine) |
Minimum Air Requirement (Equipped w/ Air Filter/Lubricator) |
85 PSI, 4-6 CFM |
Operation Type |
Automatic |
Power Source |
Air |
Blade Type |
Bandsaw |
Blade Size |
16' 0" L x 1.25" H x .042" |
Cantilever |
— |
Bandsaw Blade Speed |
N/A |
Bundle Cut? |
Yes |
Weight |
N/A |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts