Cart is empty
- Description
- SPECIFICALLY DESIGNED FOR HVAC INDUSTRY FOR AIR DUCT AND CHIMNEY PRODUCTION
- SPECIAL UPPER BEAM
- Thanks to its 120 mm high x 115 mm wide small footprint upper beam, it can fold minimum 150x150 mm air duct / chimney type parts which are totally closed after folding.
- To be able to remove the part without stretching it, upper beam is released from the right side of the frame by a pneumatic pin and the beam is retracted towards the front side.
- 1000 MM SERVO BACKGAUGE SYSTEM WITH SPECIAL HIGH GAUGING BAR
- 1000 mm servo driven backgauge and single piece high,gauging flat bar
- 1000 mm long rectangular sheet support table with stainless ball transfers
- Retractable or removable table slides
- 3 SWITCH FOOT PEDAL WITH EMERGENCY FUNCTIONS
- VERTICAL OR HORIZONTAL FRONT LIGHT BARRIERS
- For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety plc and prevent unwanted interventions to avoid accidents. You can choose as horizontal or vertical or you can completely remove the light barriers from your configuration.
- TOOL HOLDER
- 2 fixed spaces for keeping single piece sharpnose or folding tools
- ERFOLD BASIC CNC LINE BY LINE CONTROLLER SOFTWARE
- Very user friendly, iconic screen layout
- 15.6" panel touchscreen controller on swivel arm
- Windows based Erfold software that allows you to store and reload back ups of the factory settings or saves programmes easily
- 128 gb memory for unlimited receipt storage
- Line by line part programming by entering numerical values of the axes for each step
- Creating,saving,loading parts with different names,materials and sheet thicknesses
- Open or drop hemming function
- Multi radius bending function as by pressing or by bending
- Backgauge finger pause and on/off functions
- Material database control for springback correction and folding beam height correction regarding material type,thickness and length
- Piece counter for lot production
- Manual axis controls, alarm and error indications, machine detailed parameter pages
- Remote service connection via wireless internet
- User authorization with special passwords.
- STANDARD TOOLS
- UPPER BEAM PIECE SHARP NOSE TOOL
- Grinded,tool steel material, single piece, 20° nose angle
- SEGMENTED FOLDING BEAM TOOLS AND SEGMENTED LOWER BEAM TOOL
- UPPER BEAM PIECE SHARP NOSE TOOL
- MANUAL FOLDING BEAM ADJUSTMENT
- Manual height adjustment of folding beam according to the sheet thickness or bending point radius
- Located in left and right side and should be adjusted equally on both sides as thickness x 1 for sharp bending radius or thickness x 1,5 /2,5 for more oval radius.
- More you lower the folding beam,more you have to increase the bending angle in the programme to be able to catch the right bending angle.
- Manufacturer
- Specifications
- Options/Accessories
- DIFFERENT NOSE RADIUS SHARPNOSE TOOL
- Possible nose radius: R1,5 – R2 – R3 – R5 – R10
- 60 MM HIGH SEGMENTED GOAT FOOT TOOL SET 2100 MM LONG
- NEW ERFOLD BASIC 2D CNC GRAPHICAL CONTROL SOFTWARE
- Windows based software specificly designed for folders and %100 owned by Erbend
- 15.6’’ capacitve LED touchscreen controller on swivel arm
- LBL Editor: You can adjust the bending steps line by line by entering the numeric values of axis targets or measures.
- 2D part editor: you can create a new bending programme by drawing in graphic mode and visualize in 2D graphical screen
- You can determine and change the bending sequence on the created part while you are making graphical collision control
- Capability of choosing material type,thickness,springback,bending correction and creating data base for every type of material type,thickness and length
- Authorization with password
- 128 GB hard disk space which allows you to save unlimited data
- Detailed alarm,tooling and parameters page
- Custom Freight
- Video
ERBEND 6.8 ft x 16 ga. CNC Motorized Folder MFH 2115
ITEM: 6.8 ft x 16 ga. CNC Motorized Folder
MANUFACTURER: ERBEND
MODEL: MFH 2115
Manufacturer:
Erbend
Machine Type
Machine Category:
Folders
Control:
CNC
Metalworking
Material Length:
6 ft (72 in.+)
Mild Steel Capacity:
16 ga
Max Sheet Length |
6.8 ft (2100 mm) |
|
Mild Steel |
1,5 mm |
|
Stainless |
0,8 mm |
|
Aluminum |
2 mm |
|
Machine Dimensions (W/L/H) |
83 x 130 x 65 in. (2100 x 3300 x 1650 mm) |
|
Weight |
5,070 lbs. (2300 kg) |
|
Upper Beam (Z Axis) |
Beam opening (with sharpnose tool) |
120 mm |
Motor Power (AC) |
0,75 kW |
|
Power Transmission |
Eccentric |
|
Maximum clamping speed |
90 mm/sec |
|
Folding Beam (Y Axis) |
Power Transmission |
Chain gear |
Folding angle |
0-150°
|
|
Motor Power (AC) |
1,1 kW |
|
Max Bending Speed |
100°/sec |
|
Folding beam height adjustment (A1-A2 axis) |
Adjustment gap |
0/-20 mm |
Control |
Manual |
|
Backgauge system (X axis) |
Max Speed |
250 mm/sec |
Motor Power (Servo) |
400 W |
|
Positioning and Repeatability Accuracy |
+/- 0,1 mm |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts