SCOTCHMAN CPO 315 HFA/NF CNC 12.5 in. Automatic CNC Cold Saw | 460v, 3-phase

<!--StartFragment--> <ul><li>The CPO 315 HFA-CNC saw is fully programmable so every cut length is fast and accurate. It uses a 30" linear actuator, driven by a servo motor. With its 12-1/2" blade, it allows you to cut up to 3-1/2" diameter tube or pipe and up to 1-3/4" solid material, while maintaining a length tolerance of +or- .006" per index and has a squareness tolerance of +or- .002" per diameter inch.</li><li>The CPO 315 HFA-CNC's standard features include a large 10" touch screen control, an unlimited length setting with a 30" single length shuttle and a variable speed control. The setup to change to a different part length takes only a few seconds, plus the first part cut is always accurate. This saw has the ability to program a set length with a specific number of pieces or enter up to four separate lengths and amounts to be cut in sequence. This American-made machine is available in 230 or 460 volt configurations and is backed by Scotchman Industries' Best-in-the-Business, 2-year warranty</li><li>Fully Automatic Cycle</li><li>Touch Screen Controls</li><li>5 HP Variable RPM Speed Control (Ferrous Model)</li><li>Interlocking Safety Hood</li><li>Clamping both Sides of Blade--Highest Quality, Burr-free Cuts</li><li>Blade Guides for Accurate Tolerances (Ferrous Model)</li><li>Mist Coolant</li><li>Adjustable Stroke Control on the Saw Head</li><li>Adjustable Down Feed Control on the Saw Head for Feed Rate</li><li>Fast Length Setup</li><li>No Wrenches required to Set Length</li><li>Adjustable Indexing Feed Speeds</li><li>Program up to Four Separate Cut Lengths in each Job</li><li>100 Program Job Storage</li><li>30" Shuttle Length</li><li>Unlimited Shuttles</li><li>Piece Counter</li><li>One Saw Blade</li><li>One Gallon Concentrated Coolant (Ferrous Model)</li><li>One Gallon Coolant (Non-ferrous Model)</li><li><strong>Made in USA</strong></li></ul> <!--EndFragment-->