SCOTCHMAN CPO350 NF/PK/PD 14 in. Semi-Automatic Non-Ferrous Cold Saw | 460v, 3-phase

<!--StartFragment--> <ul><li><strong>Non-Ferrous machines designed for aluminum, plastic, copper, etc.</strong></li><li>Scotchman Industries powerful American-made CPO 350 NF PKPD Circular Cold Saw is the perfect machine for any fabrication shop cutting non-ferrous materials like aluminum, plastic, copper, etc. It is equipped with a pneumatic power down feed with electric controls and an emergency stop button. This dependable saw features an air-operated, double clamping and self-centering material vise for maximum hold and provides burr-free, high quality, volume parts. It has 180 degree mitering ability and a miter-locking device which automatically stops at 45 degrees left, 90 degrees straight, and 45 degrees right, giving it the ability to slot and notch. Additional machine features include a chip drawer, a double reduction gearbox, a two-speed motor which utilizes up to a 350mm diameter blade giving it a 4-7/8" OD round capacity. This machine is built with dependability and versatility in mind, with the quality you expect from a Scotchman. Always backed by their outstanding 3-Year Warranty!</li><li>Semi-Automatic Cycle</li><li>Air-operated Clamp for Material Vise</li><li>Pneumatic Power Down Feed with Electric Controls</li><li>Power Double Self-Centering Vise Assures Burr-Free Cuts</li><li>Emergency Stop Button</li><li>Miter Capabilities 45 Degrees Left and 45 Degrees Right</li><li>Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right</li><li>Capable of Slotting</li><li>5 HP, 3,000 RPM</li><li>Positive Cog Belt Driven</li><li>Chip Drawer</li><li>One Gallon Coolant Tank with Mist Lubrication System</li><li>One 350 mm Diameter Carbide-Tipped Blade</li><li>One Blade Wrench</li><li>One Gallon Coolant</li><li>230 or 460 Volt/3 Phase Electrics (must specify voltage)</li><li><strong>Made in USA</strong></li></ul> <!--EndFragment-->