SCOTCHMAN CPO 350 VS 14 in. Manual Ferrous Cold Saw | 208v 3-phase

<!--StartFragment--> <ul><li>Scotchman Industries powerful American-made CPO 350 Circular Cold Saw is the perfect machine for any fabrication shop. This dependable saw features a double clamping and self-centering vise for maximum hold and provides burr-free, high quality, volume parts. It has 180 degree mitering ability and a miter-locking device which automatically stops at 45 degrees left, 90 degrees straight, and 45 degrees right, giving it the ability to slot and notch. Additional machine features include a chip drawer, a double reduction gearbox, a two-speed motor which utilizes up to a 350mm diameter blade giving it a 4-7/8" OD round capacity. This machine is built with dependability and versatility in mind, with the quality you expect from a Scotchman. Always backed by their outstanding 3-Year Warranty!</li><li>Manual Double Self-Centering Vise Assures Burr-Free Cuts</li><li>Operator Controlled Trigger Switch</li><li>Miter Capabilities 45 degrees Left and 45 degrees Right</li><li>Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right</li><li>Capable of Slotting</li><li>Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)</li><li>Double Reduction, Hardened and Ground Worm and Wheel Gear Box</li><li>Worm Wheel of Top Quality Bronze</li><li>Chip Drawer</li><li>7 Gallon Coolant Tank with Pump</li><li>One 12-1/2" Diameter (315 mm) HSS Blade</li><li>One Blade Wrench</li><li>One Gallon Concentrated Coolant</li><li>230 or 460 Volt/3 Phase Electrics (must specify voltage)</li><li><strong>Made in USA</strong></li></ul> <!--EndFragment-->