HE&M VT100LM-45 18 in. Vertical Tilt-Frame Production Bandsaw

<!--StartFragment--> <ul><li>The VT100LM-45 will miter up to 45° in both directions. A self-contained hydraulic system powers the full stroking vise, arm tilt, and guide arm. Functions are operated from a touch screen control and the saw can be operated in manual or semi-automatic. Various options are available.</li><li>Control Console w/ 7" Touch Screen</li><li>2 Degree Arm Cant</li><li>Powered Tilt w/ Angle Readout on Touch Screen</li><li>Vise - Full Stroking Main</li><li>Adjustable Clamping Force</li><li>Carbide Blade Guides</li><li>Variable Blade Speed w/ Readout on Touch Screen</li><li>Guide Arm - Powered</li><li>Air Powered Blade Tension</li><li>Adjustable Feed Rate</li><li>Adjustable Cutting Pressure</li><li>Coolant System - Flood w/ Wash-Down Hose</li><li>Blade Brush</li><li>Boltable Side Wings for Coolant Drainage</li><li>220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine</li><li>85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)</li></ul> <!--EndFragment-->