HE&M V100HA-HC-CTS 18 in. Automatic Vertical Bandsaw

<!--StartFragment--> <ul><li>V100HLA-3HC-CTS is a “high column” version of the VT100HLA. It has an expanded height capacity of 31” at 90ᵒ which allows an 18” capacity for 45ᵒ cuts. It is equipped with a 48” bar-feed that is capable of multiple indexes controlled by touch-screen control. Two vises are included.</li><li>Swing-Away Control Console w/ 8" Touch Screen</li><li>Computer Controlled Feed System</li><li>Power Programmable Tilt from Touch Screen</li><li>Vise - Full Stroking Main & Feed</li><li>Adjustable Clamping Force</li><li>Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)</li><li>Variable Blade Speed w/ Readout on Touch Screen</li><li>Guide Arm - Powered</li><li>Powered Blade Tension</li><li>Passive "Cut Watcher" System</li><li>Idle Base Rollers - 1 Each Side of Base</li><li>Coolant System - Flood w/ Wash-Down Hose</li><li>Boltable Side Wings for Coolant Drainage</li><li>Blade Brush</li><li>Broken Blade Function</li><li>Out-of-Stock Function</li><li>Blade Change Interlock</li><li>Safety Guards</li><li>220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine</li></ul> <!--EndFragment-->