<!--StartFragment-->
<ul><li>A heavy steel frame keeps this industrial press brake accurate for decades. In just 5 minutes, anyone can learn to use the encoder-controlled stroke and back gauge, each with a DRO.</li><!--StartFragment--><li>Accessories: Included Accessories</li><li>Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production</li><li>2 encoder-controlled hydraulic cylinders move the top beam</li><li>Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time</li><li>It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel)</li><li>You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won't lose its shape</li><li>2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam</li><li>Foot pedal brings the stroke up and down, leaving your hands free to position the material</li><li>Motorized back gauge rides on a solid ball screw trolley mechanism</li><li>Back gauge encoder shows its position on its own DRO</li><li>Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine</li><li>Rigid Structure and Low Maintenance<br><ul><li>Heavy electro welded frame, made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years.</li><li>Massive 7,700-pound construction supports the hydraulic pressure, so the machine stands firm at full capacity.</li><li>Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.</li><li>Includes a set of hardened single-Vee American tooling.</li><li>Accepts standard press brake tooling, giving you a wide variety of options.</li><li>Comes with front material rests (or support arms), which some competing machines do not include.</li><li>6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.</li><li>4 grease zerks let you add oil every few months.</li><li>Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.</li></ul></li><li>Fast Shipping and Lifetime Service<br><ul><li>Typically, in stock and usually ships in 72 hours.</li><li>Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.</li><li>Comes covered by a 1-year parts warranty.</li><li>We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.<br></li></ul></li><li>Recommended for: Industrial shops, maintenance shops, and R&D shops.</li></ul>
<!--EndFragment-->
