<!--StartFragment-->
<ul><li>Simple to use, this hydraulic press brake shows the encoder-controlled bend depth and back gauge positions on separate DROs. A heavy steel frame ensures reliable production.</li><li>Produces up to 33 tons of pressure</li><li>Bends sheet metal up to 50" wide</li><li>Maximum capacity of .098" thick sheet metal across the machine’s full width</li><li>Requires 220-volt 3-phase power</li><li>Recommended for: Small industrial shops, maintenance and R&D shops, and potentially larger industrial shops, if they need to make a specific part that fits this press brake’s width.</li><li>Powerful, Easy-to-Learn Hydraulic System<ul><li>Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.</li><li>2 encoder-controlled hydraulic cylinders move the top beam.</li><li>Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.</li><li>It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).</li><li>You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.</li><li>2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.</li><li>Foot pedal brings the stroke up and down, leaving your hands free to position the material.</li><li>Motorized back gauge rides on a solid ball screw trolley mechanism.</li><li>Back gauge encoder shows its position on its own DRO.</li><li>Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.</li><li>You can train your staff to use this press brake in 5 minutes.</li></ul></li><li>Rigid Structure and Low Maintenance</li><li>Heavy electro welded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.</li><li>Robust 2,640-pound construction supports the hydraulic pressure, so the machine won’t buckle at full capacity.</li><li>Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.</li><li>Includes a set of hardened single-Vee American tooling.</li><li>Accepts standard press brake tooling, giving you a wide variety of options.</li><li>Comes with front material rests (or support arms), which some competing machines do not include.</li><li>6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.</li><li>4 grease zerks let you add oil every few months.</li><li>Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.</li></ul>
<!--EndFragment-->
