SCOTCHMAN GAA-500-90 NF 20 in. Non-Ferrous Automatic Upcut Circular Cold Saw | 230v, 3-phase

<!--StartFragment--> <ul><li>Scotchman Industries is proud to introduce the GAA-500-90, Automatic Upcut Circular Cold Saw, the newest addition to our non-ferrous saw line. The GAA-500-90 is a large capacity upcut automatic saw for cutting non-ferrous materials at 90° up to 6” square and round. The saw uses a shuttle feed design with an adjustable vertical and horizontal clamp system to fit almost any profile. Standard features include a 7.5 hp motor that delivers a cutting speed of 3,000 rpm, pneumatic mist coolant system, and a base designed with 2 chip extraction ports. Cut lengths are set by moving the hard stop that is connected to a ball screw and hand crank. The rotary dial allows for fast and easy length adjustments and part lengths are easily held to the length tolerance of +/- .006” per index. The GAA-500-90 is available in 230 volt and 460 volt configurations and is backed by Scotchman Industries’ Best-in-the-Business, 2-year warranty.</li><li>Non Ferrous Automatic Upcut Saw designed for Aluminum, PVC, Copper, etc.</li><li>Automatic Cycle</li><li>Semi-automatic or Automatic Operation</li><li>Automatic Feeder, 20 inches x 2 Strokes (20" + 20" Max.) Double Advance</li><li>Powered Hood Lift</li><li>Emergency Stop</li><li>Adjustable Cutting & Feeding Speeds</li><li>Adjustable Length Selector from .200 to 20"</li><li>Three Horizontal Pneumatic Clamps</li><li>Three Vertical Pneumatic Clamps</li><li>Miter Capability 90°</li><li>Pneumatic Lubrication System with Spray</li><li>One Gallon Coolant</li><li>Coolant Tank with Mist Lubrication</li><li>Mist Coolant Pump</li><li>One 20" (500 mm) Diameter Carbide Blade</li><li>One Blade Wrench</li><li>Air Hose</li><li>Base Designed as a Chip Collection with Two Chip Extraction Ports</li><li>Adjustable Leveling Pads</li><li>230 or 460 volt/3-ph Electrics (must specify voltage)</li><li>Warranty: Two Year on Parts</li><li>Made in Spain</li></ul> <!--EndFragment-->