<!--StartFragment-->
<ul><li>Built from <strong>steel and cast iron</strong>, this semi-automatic cold saw will last for decades. All <strong>industrial-grade components</strong>, like the gearbox, hydraulics, and <strong>coolant system</strong>, keep cuts accurate.</li><li>Accepts a maximum <strong>17” blade</strong>.</li><li>Miters <strong>45° left and 60° right</strong>, perfect for angle iron and channel.</li><li>You can switch between <strong>4 cutting speeds</strong> (35, 60, 70, and 120 rpm) to fit your material.</li><li><strong>5 hp</strong> blade motor runs on <strong>220-volt 3-phase</strong> power.</li><li>Cutting head rides up and down heavy <strong>slideway tracks, hardened and ground</strong> to offer the most accurate cuts in the industry.</li><li>Blade head allows you to <strong>adjust the descent speed</strong>.</li><li><strong>Adjustable gibs</strong> on the column give the slideways a long lifetime of use.</li><li>You can set a <strong>hard vertical stop</strong> so that the blade only cuts so far down—great for faster cycle times.</li><li>Whole carriage, including motor and blade, will <strong>slide up or down</strong> with the press of a button so you can get your material in there.</li><li><strong>Hydraulic downfeed</strong> movement of the cutting head offers precise cutting pressure through the cycle, which extends blade life.</li><li><strong>Simple to operate</strong>: put the material against the stop rod and press the foot pedal to start cutting.</li><li><strong>Hydraulic self-centering vise</strong> clamps the material, then the saw starts its descent.</li><li>After the cut, the blade <strong>automatically shuts off</strong> and returns to home position.</li><li>Choose <strong>manual or semi-automatic mode</strong> by turning a dial.</li><li><strong>Metered stop rod</strong> lets you easily make repeatable lengths for production runs.</li><li><strong>Rugged steel base</strong> reduces vibrations to produce burr-free cuts like only a cold saw can.</li><li><strong>Industrial-grade coolant pump</strong> cools the blade and washes chips away.</li><li>Flood coolant system <strong>prolongs blade and machine life</strong>, plus it helps the blade give you cuts with smooth edges.</li><li><strong>Oiler system</strong> lets you pump a lever to release oil from the reservoir and keep the head moving up and down without catching.</li><li>Comes with a <strong>box of tools</strong> for maintenance and blade changeovers.</li><li>Replacement <strong>parts are in stock</strong> for fast shipments.</li><li>We cover this vertical column cold saw with a <strong>1-year parts warranty</strong>.</li><li><strong>Lifetime technical support by phone</strong> means you can contact our team of reps—all with hands-on machine experience—any time you need help.</li><li><strong>Recommended for:</strong> Large-scale production at any full-service fabrication or machine shop.</li></ul>
<!--EndFragment-->
