Cart is empty
- Description
- Heavily proportioned welded steel frame for rigidity and stability
- 3-roll drvie
- Brake-motor for prompt stopping of rolls rotation
- Powered hydraulic adjustment of the lower rolls for double prebending capability
- Shafts are hardened and ground and rotate on amply-sized bearings
- Standard rolls handle many shapes
- Operates in horizontal or vertical plane
- Electronic digital readouts (LED) for the positions of the adjustable rolls, with programmable roll position pre-set and memory
- 3-axis mechanical guide rolls for angles leg-out and leg-in
- All three rolls driven
- Powered rolls for some of the shapes listed above; others require special rolls, details on request.
- 2 - Electronic digital readouts for the positions ofthe adjustable lower rolls with programmable pre-set and memory
- 2 - 3-axis guide rolls for angle leg-out and leg-in, manually operated
- Electric main motor with brake and motor for the hydraulic system for rolls adjustment. Electrics for 3/60/220 operation. Low voltage at the controls. Push-button controls in a rolling console.
- Emergency stop control
- Optional 2-Axis Hydraulic Guide Rolls (Included)
- Manufacturer
- Specifications
- Options/Accessories
- Optional 2-Axis Hydraulic Guide Rolls (Included)
- Custom Freight
- Video
COLE-TUVE 3" x 3" x 3/8" Hydraulic Double Pinch Angle and Shape Bending Roll with 2-Axis Hydraulic Guide Rolls HPK 80
STANDARD EQUIPMENT:
ITEM: 3" x 3" x 3/8" Hydraulic Double Pinch Angle and Shape Bending Roll with 2-Axis Hydraulic Guide Rolls
MANUFACTURER: COLE-TUVE
MODEL: HPK-80
Manufacturer:
Cole-Tuve
Machine Type
Machine Category:
Benders - Angle Roll
Power Source:
Hydraulic
Angle iron, leg-out |
3" x 3" x 3/8" |
|
Angle iron, leg-in |
2-3/4" x 2-3/4" x 1/4" |
|
Flat bar on flat |
5" x 1" |
|
Flat bar on edge |
3-1/8" x 3/4" |
|
Square bar |
1-3/4" |
|
Round bar |
2" (SP) |
|
Channel iron, leg-out and leg-in |
5-1/2" |
|
Pipe |
3" Schedule 40 (SP) |
|
Round tubing |
4" x 12 ga. (SP) |
|
Square tubing |
2-3/4" x 1/8" |
|
Rectangular tubing, hard way |
3-1/8" x 1" x 1/8" |
|
Diameter of the rolls |
9.65" |
|
Diameters of the hardened and ground shafts |
Upper shaft |
3.15" |
Lower shafts |
2.76" |
|
Rolling speed, FPM |
19-1/2" |
|
Rolls adjustment |
Powered hydraulic |
|
Motors HP |
5-1/4 |
|
Working plane |
Combination horizontal/vertical |
|
Dimensions (L x W x H, approx) |
57" x 40" x 56" |
|
Weight (approx.) |
3,740 lbs. |
|
The shapes marked (SP) require optional special rolls. The other shapes can normally be rolled with the standard rolls supplied with the machine. For production runs of some of those shapes, optional special rolls may be desirable.
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
