Cart is empty
- Description
- Drill smarter and harder with this 20” floor-type drill press which tackles hefty capacities at up to 2000 rpm. Built to deliver precise results for years, the DP-1500VS comes equipped with a variety of time-saving and performance-enhancing features.
- 2 hp motor runs on 220-volt single-phase power and will work practically anywhere.
- Handles a maximum drilling capacity of 1.5” steel and 1.75” cast iron.
- Auto-reversing tapping feature has a capacity of .937”.
- Speed range from 65 to 2000 rpm lets you pick the right setting for your project.
- Potentiometer dial controls the drill speed.
- Digital readout on the front displays the speed in rpm for easy checking.
- Sophisticated Delta inverter drives #4 Morse taper spindle.
- Chuck with automatic tool ejector simplifies tooling changes.
- Large, machined 22” x 18.5” drill table offers plenty of room for material.
- Oversized .625” T-slots allow for secure clamping of a vise or fixture.
- Sturdy 4.52” column eliminates flex and boosts drilling accuracy.
- Cast base supports rigidity at maximum capacity.
- Power-down feed helps to prolong the machine’s lifetime of use.
- Safety guard around the spindle with a limit switch protects you and your shop.
- Powerful coolant system, housed in the base, keeps the drill from overheating and helps the drill last longer.
- Includes a bright halogen light that bends to enable you to see the material better as you work.
- Baileigh covers this drill with a 1-year parts warranty and lifetime technical support.
- Why choose the DP-1500VS over similar drill presses?
- You can extend tooling usage by adjusting the inverter-driven head and quill speed to each different drill size.
- Continuous speed range, instead of just a few pre-set speeds, allows you to fine-tune the setting as you work.
- We use only the best-quality heavy metal castings for the base and table to add to the overall strength of the drill press.
- The DP-1500VS comes standard with features that other brands consider upgrades, like coolant systems and worklights.
- You can call up Baileigh’s team of seasoned customer service reps any time for troubleshooting or expert advice on how to get the most out of the machine.
- Manufacturer
- Specifications
BAILEIGH 1.5 inch Variable Speed Drill Press DP-1500VS
ITEM: 20" Heavy Duty Variable Speed Drill Press
MANUFACTURER: BAILEIGH
MODEL: BA9-1002923
Manufacturer:
Baileigh Industrial
Machine Type
Machine Category:
Drill Presses
Control:
Variable Speed
Country of Manufacture
|
Taiwan
|
Table Size
|
22" x 18.5"
|
Quill Diameter
|
2.95"
|
Quill Feed
|
.0078", .004", .002" per rev.
|
Spindle Nose to Table
|
22.75"
|
Spindle Nose to Base
|
40.75"
|
Spindle Speed High
|
245 – 2000 rpm
|
Spindle Speed Low
|
85 – 540 rpm
|
Spindle Taper
|
MT4
|
Table Slot
|
.625"
|
Tapping Capacity
|
.937"
|
Main Motor
|
2 HP
|
Power
|
220V Single Phase
|
Drill Capacity Cast Iron
|
1.75"
|
Drill Capacity Steel
|
1.5"
|
Spindle Travel
|
5.9"
|
Column Diameter
|
4.52"
|
Base Dimensions L x W
|
27" x 19"
|
Shipping Dimensions
|
40" x 25" x 83"
|
Shipping Weight
|
902 lbs.
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts