Cart is empty
- Description
- MADE IN USA
- TENNSMITH'S power shears combine all of the features of our foot shears with the advantage and convenience of air or hydraulic operation. TENNSMITH power shears are a productive addition to any shop. The air shears utilize heavy-duty, tie rod-type pneumatic cylinders, which provide up to 40 strokes per minute in capacity materials.
- A foot-operated air valve control, pressure regulator, air gauge, oiler/condenser cups and neoprene, padded holddown feet are standard features. We recommend a maximum air supply of 75 psi for operating these shears at rated capacity. Where air supply pressures exceed 75 psi, an in-line regulator is helpful to provide pressure control.
- The Model 52H cycle at 45 strokes a minute, thanks to its first class hydraulic system. The hydraulic unit is of a low maintenance design featuring a solenoid actuated valve, 3-HP electric motor, self-contained pump in tank with pressure gauge, check valve and industrial quality cylinders. The motor is protected by a magnetic starter.
- Other electrical safety features include a low voltage on/off switch; low voltage, shrouded, electric foot switch; step-down transformer with low voltage circuit fuse; fully enclosed electrical box; and insulated reinforced conduit for all wiring. Models 36A and 52A are ideal ways to enhance shearing productivity with minimal investment.
- High Carbon/High-Chromium (HCHC) Blades
- Back gauge
- Front extension arms with stop
- Bevel gauge
- Graduated side gauges
- Foot control
- Neoprene padded hold down feet
- Manufacturer
- Specifications
- Options/Accessories
- Wired for CSA Canadian Electrical Standard: ADD $495.00
- 81555: 2 inch HCHC Blades, per set: $850.00
- 81510: 4' Squaring Arm: $895.00
- Custom Freight
TENNSMITH 52-1/4 inch x 16 ga Hydraulic Shear MODEL 52H 1-phase
STANDARD EQUIPMENT:
ITEM: 52-1/4" x 16 ga Hydraulic Shear 1-phase
MANUFACTURER: TENNSMITH
MODEL: 52H
PART# 81100
Manufacturer:
Tennsmith
Machine Type
Machine Category:
Shears
Power Source:
Hydraulic
Metalworking
Material Length:
4 ft (48 in+)
Mild Steel Capacity:
16 ga
Stainless Steel Capacity:
20 ga
MODEL
|
52H
|
Operation
|
Hydraulic
|
Maximum shearing capacity, Mild Steel
|
16 gauge/1.6mm
|
Maximum shearing capacity,
Stainless Steel |
20 gauge/1.0mm
|
Maximum cutting length
|
52-1/4" / 1,327mm
|
Back gauge range
|
30" / 762mm
|
Front gauge range
|
37" / 940mm
|
Floor space, gauges in position
|
60" x 80"
|
Dimensions, Less gauges, LxWxH
|
61" x 25" x 42"
|
Strokes per minute, full length
|
45
|
Maximum Operating Pressure
|
1,450 psi
|
Air Consumption per Stroke
|
N/A
|
Motor: 230V, 1ph, 60Hz, 1,745 RPM
|
5 HP
|
Shipping Weight:
|
1,300 lbs. / 590kg
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Limited