Cart is empty
- Description
- MADE IN USA
- TENNSMITH'S MSE Series mechanical shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance.
- The MSE Series come standard with four-edge, high carbon, high chrome blades, a self-leveling hold down bar with neoprene insert, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table, dual inch/metric inlaid bed scales and non-metallic gibs. The MSE Series also incorporates the unique front operated 2X-F back gauge system. This system allows the operator to move the backstop from 0 to 30 inches in approximately 2 seconds with only tow rotations of the handle. Capacities of the shears are 16-gauge mild steel, 22-gauge stainless with 73 or 121 cutting lengths and speeds of 40 strokes per minute.
- The MSE616-R / MSE1016-R shear is standard in a "Performance Package-R" configuration. The Performance Package includes: a five foot squaring arm, a pair of front support arms, rear material return air operated sheet support system, and part counter.
- The MSE616-F / MSE1016-F shear is standard in a "Performance Package-F" configuration. The Performance Package includes: a four foot squaring arm, a pair of front support arms, front material return air operated sheet support system, and part counter.
- Note: Performance Packages are Preferred Options
- Manufacturer
- Specifications
- Options/Accessories
- Single Phase Electrics: ADD $1,995.00
- Wired for CSA Canadian Electrical Standard: ADD $415.00
- 82605: MSE616 High Carbon High Chrome 4 Edge per set: $1,290.00
- 82515: Additional Flip-up Stops for Squaring Arm (each): $230.00
- 82520: Front Support Arms Pair: $310.00
- 82580: Stroke Counter (Electro-Mechanical): $340.00
- 82525: Protractor Attachment: $685.00
- 83895: Digital Readout for 2x-F Back-gauge System: $1,150.00
- 82505: Squaring Arm Five Foot with Dual Inlaid Inch/Metric Scale: $1,180.00
- 82510: Squaring Arm Ten Foot with dual Inlaid Inch/Metric Scale: $2,655.00
- The MSE Performance Package Includes:
- Note: Performance Packages are Preferred Options
- Air-operated sheet support system, F or R:
"F" is a Front Return Material System via material tray located under
the shear table.
"R" is a Rear Return Material System
"FC" Front Return Material System and includes a front return material cart as standard. The material cart allows for sheared materials to be moved from the shear to other areas in the shop without restacking. - Five-foot squaring arm
- Pair of Front support arms
- Custom Freight
TENNSMITH 73" x 16 ga Mechanical Shear MSE616
ITEM: 73" x 16 ga Mechanical Shear
MANUFACTURER: TENNSMITH
MODEL: MSE616
Manufacturer:
Tennsmith
Machine Type
Machine Category:
Shears
Machine Sub-Category:
Mechanical
Metalworking
Material Length:
6 ft (72 in.+)
Mild Steel Capacity:
16 ga
Stainless Steel Capacity:
20 ga
|
MODEL
|
MSE616
|
|
Maximum shearing capacity, Mild Steel
|
16 gauge/1.6mm
|
|
Maximum shearing capacity, Stainless Steel
|
20 gauge/1.0mm
|
|
Maximum cutting length
|
73" / 1,854mm
|
|
Back gauge range
|
30" / 762mm
|
|
Strokes per minute, full length
|
40
|
|
Motor - 230/460V, 3-Phase, 60Hz
|
3 HP
|
|
Number of hold downs
|
Solid BAR
|
|
Floor space, gauges in position
|
92" x 69" x 50"
|
|
Shipping Weight:
|
2,300 lbs. / 1,046kg
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Limited
