Cart is empty
- Description
- CNC control by Acu-Rite and FAGOR for 2 axes and 3 axes. The 3rd axis is on the quill. Conversational programming allow easy operation of the machine without using G code.
- ISO 9002 Certified: Quality Up To World Industry Standards.
- Meehanite Casting: Highest Grade Of Casting Possible.
- A Pair Of High Out-Put Fans: Keeps Head And 3-Hp Motor Cool, To Run Jobs For Extended Periods Without Damaging The Motor, Belts And Bearing.
- A Pair Of Precision ABEC-7 Angular Contact Bearings To Support Spindle. The Quill Is Ground And Chromed To Fit The Housing: This Insures A Spindle Runout Of .0002” T.I.R.
- Motor Shaft And Varidrive Pulleys Are Dynamically Balanced, Then Chromed For A Flawless Fit, Ground Ribs On Inside Diameter: For Smooth Speed Changes.
- Motor Shaft Has An Oil Channel In The Center That Is Fed By A Grease Fitting On The Lower End: To Keep Vari-Drive Pulley Moving Smoothly On The Shaft.
- This LMV-50 Mill Uses A Roller Bearing For The Lower Support Of The Shaft: It Ensures Proper Loading, Support And Alignment It Also Prevents The Shaft From Being Distorted By The Tension Of The Belt: For Quiet, Accurate Operation At Any Speed For Years And Years.
- One Shot Lubrication System: For Lubrication Of Ways And Lead Screws. (X,Y And Z-Axis)
- Hand Scraped Saddle And Knee: For Better Oil Retention. It Avoids Having Chips And Dirt Embed In The Knee And Damage The Sliding Surface.
- Oil Groove Are Milled: For Maximum Lubrication On All Wear Areas.
- Table And Saddle Backlash Is Controlled By Double Nut Design: Keeps Lead Screw In Contact With Bronze Nuts An All Times To Keep Backlash At .0008” Within 20”.
- Table And Saddle Are Mounted With Thrust Bearings That Are Pre Loaded: Eliminating Endplay For Precisely Controlled Lateral Movement.
- Patient Knuckle Design Uses 6 Bolt 3 Per Side, Securing Them From The Outside:This Method Locks The Head Securely Resulting In Better Accuracy And Performance.
- Ways Are Hard Chrome Dovetail On Saddle And Column.
- "Bridgeport-type" mill
- AcuRite 3 Axis 3500i control
- Hard-Crome Ways
- Rubber Way Covers, Front and Rear
- Automatic Lube System
- Tool Kit includes:
- Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
- Manufacturer
- Specifications
- Options/Accessories
- Remote Start/Stop Switch
- Remote Manual Handwheel
- Acu-rite Electrical Edge Finder
- Acurite D.R.O. System on Knee
- DRO System Installation Charge
- 6” “Kurt” Vise with Swivel Base
- Drill Chuck & Drill Arbor
- Coolant System with Chip Pan At Base
- “Maxi-Torque Rite” Power Draw Bar
- Factory Installation Charge – PDB, Each
- Clamping Kit (52 pcs/steel rack)
- Halogen Work light
- Custom Freight
SHARP CNC Vertical Knee Mills with AcuRite 3-Axis 3500i Control LMV/3500i
STANDARD EQUIPMENT:
ITEM: 9" x 42"- 50" CNC Vertical Knee Mills with AcuRite 3-Axis 3500i Control
MANUFACTURER: SHARP
MODEL: LMV/3500i / LMV-50/3500i
Manufacturer:
Sharp
MODEL
|
LMV/3500i
|
LMV-50/3500i
|
|
TABLE
|
Working surface
|
9" x 42"
|
9” x 50"
|
T-slot number, size
|
3, 5/8"
|
||
CAPACITY
|
Travels (X, Y, And Z)
|
25" (with CNC installed)
|
—
|
Table travel; x-axis
|
—
|
32” (with CNC Installed)
|
|
Saddle travel; y-axis
|
—
|
11"
|
|
Ram Travel
|
11"
|
12"
|
|
Quill travel (Z-axis)
|
—
|
5"
|
|
Knee travel
|
16"
|
||
Spindle to column (min-max)
|
6 3/4" - 18 1/2"
|
||
Spindle to nose to table (min-max)
|
2 1/8” - 18"
|
||
SPINDLE
|
Motor
|
3 HP
|
|
Wiring voltage
|
—
|
220/440v, 3 phase, 60 Hz
|
|
Taper
|
R-8
|
||
Speed (vari-speed)
|
60-4,500 RPM
|
||
Quill feed (IPR)
|
0.0015”, 0.003”, 0.006"
|
||
Head swivel
|
360°
|
||
Head Tilt (Lt. To Rt)
|
45°
|
—
|
|
Head tilt up-and-down
(each way) |
45°
|
||
DIMENSIONS & WEIGHT
|
Floor area (w x d x h)
|
7’ x 6.5’ x 6.75’
|
101" x 64" x 84"
|
Net weight
|
2,750 lbs.
|
3,250 lbs.
|
|
TOTAL POWER CONSUMPTIONS
|
220V
|
3KVA/15 amps
|
3KVA/15 amps
|
440V
|
3KVA/7.5 amps
|
3KVA/7
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts