• Fanuc 20-TA Industry Standard CNC
• 9” monochrome monitor & 44 key keypad
• 2-axis (X & Z) digital readout screen
• Simultaneous 2-axis linear and circular interpolation
• Manual operation via handwheels
• Machine guidance operation via handwheels
• Teach-in / Playback operation: manually run 1st part, then Playback for automatic operation
• Automatic Generation of G-code from Geometry data during teach in operation
• Full CNC G-code, M-code, T-code, and S-code Functions
• Simultaneous multiple M-code processing (Up to 3 M-codes)
• 6 CNC Operation Modes: MEM, EDIT, MDI, Mchn Gdnce, Man/Hndwl, Ref Return
• 5 Auxiliary CNC Modes: Dry Run, Single Block, Optional Blk Skip, Manual Handwheel Interrupt, and Auxiliary Function lock
• Manual Interrupt of automatic operations: Handwheel Interrupt and Spindle Interrupt
• Constant Surface Speed (CSS) control for manual and automatic operations (Standard)
• Conversational graphics programming
• Diameter / Radius programming
• Absolute and incremental programming
• Inch / Metric input and display
• On-line calculator function to aid in data input
• On screen tool path graphics to verify part program
• Taper, Chamfer, Radius, Roughing, Grooving, & Drilling in Manual and Automatic modes
• Inch/Metric threading; Straight, Taper, and Multi-lead threading
• X-Area Minus Area Cutting Function (Cutting from backside of part)
• User programmable “Software Travel limits” to limit the travel for X & Z axes
• Intelligent hardware travel limits - only stops movement in the over-travel direction
• Inch / Metric feed rate input: inch/rev and inch/min or mm/rev and mm/min
• Gear indicator lights on status panel
• Auto spindle jog during gear changes
• Spindle load meter: 0% - 180% of rated load
• Lock switch for disabling parameter and program modification
• Conveniently mounted machine controls on apron - E-Stop, Playback, Start, Stop
• Aux. Controls on apron: work lamp, coolant, and CSS on/off
• Spindle control on apron: forward, reverse, stop, and speed dial
• Auto/Jog feedrate override: 0% to 200%
• User selectable Jog / Feedrate override profiles: Linear or Exponential
• Spindle override: 50% to 150%
• Rapid Traverse override: 12.5%, 25%, 50%, & 100%
• Incremental / continuous jog for X & Z axes
• Intelligent Bi-directional home search for X & Z axes
• Triple electronic handwheels for manual and automatic turning operations (Simultaneously)
• Multiplier switch for handwheel sensitivity: 0.0001”, 0.001”, & 0.01”
• CNC “RUN VERIFY” by Joystick or handwheel for all automatic operations
• Easy one touch X-Z Part Coordinate System setting
• Full CNC control of coolant on-off functions via M-codes
• Full CNC control of work light on-off functions via M-codes
• Three coordinate systems: Machine, Absolute, & Relative
• Program storage 63 part program storage, 40 meters of paper tape (131 feet)
• Backlash error compensation
• Ballscrew pitch error compensation (from Laser Calibration Data)
• Built-in RS-232 port for loading/unloading of part programs and other CNC data
• 16 Tool Geometry and 16 Tool Wear offsets with tool nose radius compensation
• Self diagnostics with error messages on screen

Design and Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts