- Description
- 1.5 Motor
- Two “V” way for extra accuracy in cross travel
- Both ways are hand-scraped and covered with Turcite B coating
- Accurate slot grinding achieved using saddle locking system
- Double-nut backlash eliminator
- Cross slide and column screws are hardened and ground to a 70 Rockwell C Hardness
- Wire rope driven table
- Main spindle run-out within 0.0001”
- Automatic lubrication system
- Grinding Wheel (8” x 0.63” x 1.25”)
- Auto Lube System
- Wheel Adapter/Flange
- Wheel Balancing Arbor
- Work Light
- Diamond Dresser
- Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
- Wired 220v or 440v. Please specify
- Manufacturer
- Specifications
- Options/Accessories
- Custom Freight
SHARP 6" x 18" Manual Surface Grinder SG-618
STANDARD EQUIPMENT:
ITEM: 6" x 18" Manual Surface Grinder
MANUFACTURER: SHARP
MODEL: SG-618
Manufacturer:
Sharp
|
CAPACITY |
Maximum grinding length |
18.5" |
Maximum grinding width |
6.3" |
|
Max distance: table to spindle center |
16" |
|
|
TABLE |
Working surface (W x L) |
6" x 18.3" |
Maximum longitudinal travel |
18.9" |
|
Maximum cross travel |
7" |
|
|
FEED |
Hand feed per revolution (longitudinal) |
4.2" |
Hand feed per revolution (cross) |
0.2" |
|
Graduation of hand wheel |
0.001" |
|
Hand feed per revolution (vertical) |
0.05" |
|
Graduation of hand wheel |
0.0001" |
|
|
SPINDLE AND WHEEL |
Spindle motor |
1-1/2 HP |
Spindle speed |
3,600 RPM |
|
Grinding wheel outside diameter |
8" |
|
Grinding wheel bore |
1.25" |
|
Grinding wheel width |
0.63" |
|
TOTAL POWER CONSUMPTIONS |
220V |
1.5KVA / 4 amps |
|
GENERAL |
Floor space (W x H x L) |
83" x 40" x 48" |
Net weight (approximately) |
1,510 lbs. |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
SEE ATTACHMENTS TAB FOR PRICES
|
PART #
|
ITEM
|
|
KMT-1545B
|
6x18 Kanetsu Permanent Magnetic Chuck
|
|
KRTW-1545
|
6x18 Kanetsu Permanent Magnetic Chuck (Fine Pole)
|
|
KET-1545
|
6x18 Kanetsu Electro-Magnetic Chuck w/Control
|
|
KETW-1545 A
|
6x18 Kanetsu Electro-Magnetic Chuck w/Control (Fine Pole)
|
|
LBP-618
|
6x18 Walker Electro-Magnetic Chuck (Fine Pole) w/ SMART-1B Control
(ALL MAGNETIC CHUCKS INCLUDE FREE INSTALLATION) |
|
SG-05
|
Parallel Dresser
|
|
BS-SG/SP
|
Balance Stand
|
|
SG-08
|
Extra Wheel Adapter (Flange)
|
|
CS-A
|
Coolant System (12 Gal.) w/Splash Guard
|
|
SG-004
|
Splash Guard
|
|
DC
|
Dust Collector
|
|
CS&PF&MS
|
Coolant System w/Magnetic Separator & Paper Filter (25 GAL), 220V/440V
|
|
MCA40/PF
|
Coolant System w/Magnetic Separator & Paper Filter (25 GAL), 380V
(for International use) |
|
—
|
CE mark
|
|
FG-SG618
|
Fagor 20i D.R.O.
|
|
FG-40i-SG618
|
Fagor 40i D.R.O.
|
|
AR-SG618
|
Acu-Rite 200S D.R.O.
|
|
NW-SG618
|
Newall DP700 D.R.O.
|
|
—
|
FACTORY INSTALLATION
|
