Cart is empty
- Description
- 10 X 54” Table
, long saddle & box way on Y - Hardened & Ground Table with Ground T-Slot
- 3HP Spindle Motor, variable speed
- R8 (or NST#30) Spindle Material Scm415(SAE4115)Hardened & Ground.
- Bearing support to the motor shaft
- Licensed Meehanite Casting
- Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
- Turcite-B On X&Y Ways, Slideways and Gibs.
- Hardened & Ground X&Y Slideways.
- Electroless Nickel-Phosphorus Process On X&Y leadscrew with hardness 35 HRC.
- Leadscrew nut made from PBC2, phosphor bronze
- Highly Improved Vari-Speed Head.
- Rubber chip cover (front & rear )
- 1-1/2”(38mm) Diameter Lifting Screw.
- Leveling Screw & Plate On Base.
- Tool box & Tools
- Rubber chip cover ( front & rear )
- Machine made in Taiwan complete
- Two-year warranty for all mechanical and one-year for electrical components
- Manufacturer
- Specifications
- Options/Accessories
- Align AL-500 Power feed for X: ............................................. $ 800.00
- Servo model 150 Power Feed X (M-0200-150):................. $ 1,100.00
- Servo model 150 Power Feed Y (M-3550-150):................. $ 1,375.00
- Align AL-500 Power feed for Y OR Z:.................................... $ 850.00
- Servo power feed (Z axis) Model 200 (M-3580-200):........ $ 1,300.00
- Coolant system (1/8 HP,3PH,220V )....................................$ 400.00
- Coolant tray (Base)................................................................. $ 300.00
- Quartz work light:..................................................................... $ 260.00
- 6” Angle-fixed milling vise with swivel base:...................... $ 460.00
- Clamping kit (54 pcs):............................................................ $ 100.00
- R8 Right Angle Attachment complete set........................... $ 880.00
DRO System:
- Newall DP700 mill package, 3 Axis .....................................$ 2600.00
- Newall DP700 mill package, 2 Axis......................................$ 1900.00
- Sino DRO system, 2 axis........................................................$ 1000.00
- Mitutoyo Quill kit........................................................................$ 600.00
Power Drawer bar:
- Automatic Power Drawbar (R8 ) .......................................... $ 800.00
- Custom Freight
MANFORD 10" x 54" Super Precision Vertical Turret Milling Machine SP-460VS
ITEM: 10" x 54" Super Precision Vertical Turret Milling Machine
MANUFACTURER: MANFORD
MODEL: SP-460VS
Manufacturer:
Manford
Machine Type
Machine Category:
Mills
Machine Sub-Category:
Turret
Metalworking
Mill Capacity:
10" x 54"
Table |
10” x 54” (250 x 1370mm) |
|
T-Slot No.x Size |
3” x 0.629” (3 x 16mm) |
|
Table Load |
800 lbs. |
|
Longitudinal travel |
W/O power feed |
34” (870mm) |
With power feed |
30.5” (775mm) |
|
Cross travel |
15-3/8” (390mm) |
|
Travel of knee |
15-3/8” (390mm) |
|
Ram travel |
22” (560mm) |
|
Quill travel |
5” (127mm) |
|
Table to spindle nose (D) |
4” — 20” (100-506mm) |
|
Over swivel on turret |
360º |
|
Head Swivel ( R & L ) |
+45º |
|
Head tilt ( UP & DOWN ) |
45º |
|
Spindle to column (F): |
6.25”-28.3” (159-719mm) |
|
Spindle motor: |
3HP |
|
Spindle taper |
R8 |
|
Quill feed |
0.0015” - 0.003” - 0.006” |
|
Spindle Speed (r.p.m.): |
( 60Hz) 60-4500, ( 50Hz ) 50-3800 |
|
Overall height (A): |
87” (2211mm) |
|
Overall depth (B): |
82” (2087mm) |
|
Overall width (C): |
72.4” (1840mm) |
|
Net Weight |
3,000 lbs. (1300 Kgs) |
|
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 2 YEAR – All mechanical
WARRANTY: 1 YEAR – Electrical components
