KALAMAZOO 4 x 36 inch Industrial Belt Sander S4S

• The S4S 4" x 36" inch industrial belt sander is the perfect tool for tackling a variety of sanding tasks, from deburring and shaping wood and metal to smoothing out rough surfaces.
• Motor specifications: 1/2 HP 1 phase 115V
• Switch type: on/off toggle switch
• Motor RPM 3450 RPM motor
• Belt speed: 3600 SFPM.
• Two-position sander head (vertical and or horizontal)
• Adjustable and replaceable steel work table
• Work table size: 5" x 2.5" D. Adjustable to 20° up and 45° down
• Cast iron frame with platen
• Platen size: 7.25" H x 4.25" W
• Work area: 5.5" H x 4.25" W
• Preset spring belt tension
• Aluminum drive pulley
• Idler pulley with sealed bearings
• Cast iron yoke
• Heavy-duty construction
• Easy to track sanding belt
• Full-boxed guard 
• All metal construction
• Quick belt change
• Made In The USA!
• Designed To Do The Following
  • Removing sharp edges and burrs from:
    • Metal workpieces (e.g., after cutting, drilling, or grinding)
    • Wood workpieces (e.g., after sawing or routing)
    • Plastic workpieces (with appropriate sanding belts)
  • Smoothing rough surfaces on:
    • Wood (e.g., before finishing)
    • Metal (e.g., before painting or coating)
  • Flattening uneven surfaces on:
    • Wood (e.g., tabletops, doors)
    • Metal (e.g., sheet metal, plates)
  • Removing rust from metal surfaces
  • Cleaning up old paint or finishes from wood or metal
  • Preparing surfaces for bonding or adhesives
• Materials the S4S Can Sand
  • Wood: Softwoods, hardwoods, plywood, veneers, etc.
  • Metal: Steel, aluminum, brass, and other ferrous and non-ferrous metals (use appropriate sanding belts).
  • Plastics: Many types of plastics, but test on a scrap piece first.
  • Fiberglass: Use caution and appropriate sanding belts to avoid damaging the material.
  • Composites: Some composites can be sanded with the S4S, but research specific recommendations for the type you’re working with.