Cart is empty
- Description
- These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
- Full bearing support on quill for maximum spindle stiffness
- Handwheel speed adjustment of 400 to 5,000 RPM
- Large 2-1/4" quill for greater accuracy
- 3" column diameter for maximum head support
- 6" stroke for deep hole application
- Accurate depth stop for precice hole depths
- 1/2" drill chuck and arbor included
- Safety collar
- Manufacturer
- Specifications
JET J-A5816, 15" Variable Speed Floor Model Drill Press 115/230V 1Ph, 354550, 354551
ITEM: 15" Variable Speed Drill Presses
MANUFACTURER: JET
MODEL: J-A5816 / J-A5818
PART# 354550 / 354551
Manufacturer:
Jet
Machine Type
Machine Category:
Drill Presses
Control:
Variable Speed
MODEL |
J-A5816 |
J-A5818 |
Part # |
354550 |
354551 |
Drills to Center of Circle (in.) |
15 |
|
Drilling Capacity Cast Iron (in.) |
5/8 |
|
Drilling Capacity Mild Steel (in.) |
1/2 |
|
Column Diameter (in.) |
3 |
|
Distance Column to Spindle (In.) |
7-1/2 |
|
Spindle Travel (In.) |
6 |
|
Spindle Distance to Base (In.) |
44-1/2 |
|
Spindle Distance to Table (Max.) (In.) |
25-3/4 |
|
Table Size (L x W) (In.) |
5 x 8 |
|
Table Travel (In.) |
16-3/4 |
|
T-Slots Number and Size (In.) |
2 and 1/2 |
|
T-Slot Centers (In.) |
5-5/16 |
|
Work Table Weight Capacity (Lbs.) |
90 |
|
Spindle Taper (In. x TPI) |
MT-2 |
|
Range of Spindle Speeds (RPM) |
400 - 5000 |
|
Base Dimensions (In.) (L x W x H / in.) |
20-7/16 x 14-3/16 x 3-1/8 |
|
Base Slots Number & Size (in.) |
2 & 1/2 |
|
Motor |
1 HP, 1 Ph, 115/230V, Prewired 115V |
1 HP, 3 Ph, 230/460V, Prewired 230V |
Overall Dimensions (in.) |
30 x 20 x 71 |
|
Weight (lb.) |
426 |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 2 YEAR