DoALL 18 inch Dual Miter Semi-Automatic Band Saw DS-600SA

• Machine Capacity: w 23.5" x h 18" (600mm x 460mm)
• Round Tube: 18" (460mm)
• Production Level: Intermediate/Medium
• Standard Features: Dual-Swivel Head To 60 Degrees (L&R), Digital Touch Screen Controls, Hydraulic Variable Vise Pressure and Mist Lubrication
• The DoALL DS-600SA is ideal for fabrication shops, repair facilities and industrial manufacturing plants that cut tubing and structural shapes. A large variety of optional accessories are available to customize the machine for specific sawing requirements.
• DS-600SA is semi-automatic, dual-miter metal-cutting band saw is designed for straight and angled cuts. Miter angle cuts are possible up to 60° left and right. A Mitsubishi digital controller comes standard, loaded with proprietary DoALL operating software and makes it easy to verify exact cutting angles and streamline the production of parts.
• Operator Control Console - Control console can be positioned for operator comfort and safety insuring hands are away from blade at band start.
• Mitsubishi Touch Screen Panel - The touch screen control panel displays the cutting cycle indicator, blade tension indicator, BRP (overfeed protection) function, band speed, head angle, band drive amp load and a list of error messages allowing the operator to monitor machine functions.
• Saw Head Design - The robust head is mounted at a 2-degree slope which decreases tooth load at the end of the cut increasing band life.
• Direct Driven Band Drive - Drive is comprised of an electric VFD controlled motor transferring power through a gear reduction unit directly to the drive wheel eliminating belt slippage and giving positive torque to the blade.
• Semi-Automatic Cycle - Programmable cycle allows the operator the ability to control hydraulic on-off, saw head movement after the cut, head raise limit through programmable set point, band drive on-off, and vise clamp-unclamp after the cut maximizing productivity.
• Automatic Overload Feed Protection - BRP function monitors band drive motor amperage stopping head fall when operator set parameter is reached signaling overfeed or a dull saw band. Band Wheels - Cast steel wheels insure band tracking and long life.
• Hydraulic Clamping Vise - Full stroke, hydraulic vise can be positioned on either side of band allowing maximum clamping close to the cut line eliminating material movement and tooth strippage.
• Hydraulic Blade Tension - Illuminating indicator prevents the possible error of over/under-tightening the band for maximum cutting rates and band life.
• Band Brush - Driven band brush removes the chips from the blade gullets which would prevent the blade from attaining maximum cutting rates and blade life.
• Counter Balance Spring - Counter balance springs maintain constant head weight throughout the cut keeping the blade tooth load equal aiding in maximum blade life.
• Head Turn Table - Manual position of the saw head is accomplished by releasing the lock mechanism and rotating the head to the desired angle monitored on the digital display.
• Warranty - One-year parts only subject to terms and conditions. Optional 10-year warranty with DoALL Cut Above 10 Year Warranty

STANDARD EQUIPMENT:

• Dual swivel head to 60 left to 60 degrees right
• Semi- Automatic cycle
• Movable control console
• Rapid head down approach
• Carbide faced saw guide inserts
• Programmable material height sensor
• Full stroke hydraulic vise
• Driven band cleaning brushes
• Infinite band speed controlled by variable frequency drive
• Heavy duty counter balance springs
• Cast Steel band wheels
• Fine adjustment head feed control
• Spring loaded detent positioning
• Hydraulic band tension
• Recirculating coolant system
• Mist band lubricator system
• Digitally displayed angle position
• Variable Vise Pressure
• 2 degree cant design
• Saw blade guards
• Band door interlocks
• Operation and parts manuals on USB stick
• Recommended band speed chart
• One (1) complimentary DoALL Bi Metal saw blade
• Complimentary DoALL Cutting Fluids package