DOALL 31.5 inch Semi-Automatic Bandsaw DC-800SA

• Machine Capacity: w 39.5” x h 31.5″ (1000mm x 800mm)
• Machine Capacity Round: 31.5" (800mm)
• Production Level: High
• Standard Features: 15 HP Band Drive Motor, Hydraulic Shuttle Roller Table and a Programmable Logic Controller for All Machine Functions
• The DC-800SA Semi-Automatic Continental Series high production, horizontal band saw by DoALL is designed for cutting a wide range of metals on a production basis.
  
• If you have operations that do not require indexing, high production or automatic cutting cycles, an affordable DoALL semi-automatic saws is the perfect choice for reliable and long-lasting performance.
  
• Once the desired feed rate, blade speed and initial vise opening is set on the Mitsubishi PLC -- a cut is complete, the band shuts off and the head returns to the upright open position and locks. Then the operator must manually reposition the material for another cut.
• Push Button Control Panel: Ergonomically placed, user friendly push button control panel
• High-Efficiency Transmission: High-efficiency planetary gear box built to decrease wear and transmit full torque to the saw blade.
• Hydraulic Chip Conveyor: Adjustable speed auger style conveyor allows for coolant drain from chips before extraction.
• Coolant Thru Carbide Faced Saw Guide Inserts: Supplies coolant to the blade evenly before and after the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
• Efficiently Designed Hydraulic System: Engineered low pressure system allows for a smoother and quieter operation which aids in longer component life and easy accessibility for maintenance.
• Band Wheels: 28 Degree lay back head design minimizes band twist which causes band fatigue and also allows a smaller foot print. Flange cast steel wheels insure band tracking to prevent tooth set lost.
• Material Positioner: Hydraulic shuttle roller table assist's operator in positioning material which decreases setup time.
• Movable Saw Guide Arm: Electrical driven movable guide arm with hydraulic lock system aids the operator in placement of the arm close to the cut to minimize blade deflection.
• Hydraulic Blade Tension: Hydraulically driven lever type design eliminates possible error of over/under tightening the band for maximum cutting rates and band life.
• Back-up Bearing/Inserts: Supports the back of the saw band allowing the creation of band preload which aids in reducing vibration while cutting and increasing blade life.
• Warranty: One year parts and service subject to the terms and conditions. 10 year manufacturer’s warranty available (DoALL Cut Above 10 Year Warranty).

STANDARD EQUIPMENT:

• Programmable Logic Controller (PLC) for all machine functions
• Feed rate/feed force saw head control
• Infinite band speed controlled variable frequency drive
• Hydraulic retractable shuttle roller table for material
• positioning with rapid and creep speed control
• Full stroke vices with outboard front vise
• Variable vice pressure control
• Hydraulic set, zero clearance, coolant through, carbide faced saw guide inserts with lead in rollers
• Adjustable power driven band cleaning brushes with coolant flush line attached
• Halogen work light
• Electric motor driven movable saw guide arm
• Blade shock proof device
• Flushing hose for machine wash down and auxiliary coolant nozzles
• Hydraulic band tension
• Hydraulic adjustable speed auger design chip conveyor
• One shot column lubricator
• Saw band break/stall motion detector shut off switch
• Band door interlocks
• Operation and parts manuals on USB stick
• One 6.5 ft. (2M) idler input conveyor
• Maintenance tool kit
• Complimentary DoALL Cutting Fluids package
• One (1) complimentary DoALL Bi Metal saw blade