5' x 110 Ton COLE-TUVE Hydraulic Press Brake PBS-5-110 AP

• HYDRAULIC PRESS BRAKES: Model PBS-AP is standard with press brake tooling.
• COLE-TUVE's Model PBS Hydraulic Press Brakes and Presses are designed for moderately heavy and comparatively short bending requirements. Other designs have two bending length capacities - overall and between housings. However, on the Model PBS the two are the same, so bending length is not limited to the pass-through distance between housings and there is no need to pay the extra cost for a longer machine. Power to the ram is supplied by a single hydraulic cylinder so ram parallelity during descent and return is assured and complex components are eliminated. Two auxiliary cylinders are used for guiding the ram. With this system, gibs and other costly and maintenance-intensive guiding systems aren't necessary. The frames are constructed of structural steel and plate weldments providing a dynamically solid and highly stable unit. The standard beds are larger front-to-back than on other machines, allowing for the use of conventional press brake dies and other tooling. The PBS design provides a very large shut height to accommodate not only normal but even unusual requirements. The bed can easily and quickly be positioned for the required die space. Stroke length is adjustable from minimal to the maximum indicated for each machine. All PBS Models are equipped with three ram speeds for the most efficient operation: Approach, Bend, Return, and they are available in standard speed and optionally with high-speed. PBS-AP Models are supplied as standard with an upper gooseneck die and lower 5-opening die. PBS-AT Models are equipped with a T-slot upper platen to hold bending, punching, straightening and similar tooling as well as optional press brake dies. T-slots are arranged across the narrow dimension of the bed or optionally in other patterns. All models are equipped with stepless pressure and stroke adjustments. Internationally recognized sources are used for electrical and hydraulic components. Power is supplied by an amply-sized central hydraulic system with controls. Operation is by a two-hand control mounted on a console with a trailing lead. Check valves protect the hydraulic system against overload. An emergency stop control is standard. Options include a 39" manual, rear-operated or power, front-operated backgauge, digital readout and high speed models. Electrics are 3/60/220/440 with low voltage at the control. Special electrics are available according to customer requirements. The machines are CE certified for meeting rigid standards of design, production and quality.

MANUFACTURER: COLE-TUVE