Cart is empty
- Description
- Made in Taiwan - High Quality!
- Acra’s Precision Gap Bed Heavy Duty Engine Lathes are made in Taiwan and features the following:
- Gearbox:
• The gear box is entirely enclosed construction and provide a range of feedings or thread cuttings (inch, metric, module pitch and diametrical pitch).
• Inch and Metric threading without changing gears.
• Oil both lubrication and built in safety clutch safeguards the continuous and proper operation of the universal gear box. - Headstock:
• The spindle is supported by high precision bearings suitable for both heavy and precision cutting.
• The speeds of spindle have 12 steps and designed on theoretical base. All gears and shafts are made of Ni-Cr-Mo steel and carbonize and ground.
• Control of main drive through electromagnetic brake, and automatic forced lubrication.
• Spindle Bore size wide selections-153 mm( 6″ ), 230 mm( 9″ ), 255 mm(1 0″), 310 mm(12″), 355 mm(14″), 405 mm(16″), 530 mm(21″). - Carriage and Apron:
• The compound rest can be fixed on the cross-side anywhere, convenient for cutting work application.
• The apron gives automatic lubrication and locked safety device protect threads and feeding.
• Rapid traverse drive for longitudinal-cross feeding and forward & reverse feed are operates very light and convenient. - Taper Attachment:
• The taper attachment is designed to easily operate and rapidly cut taper in high accuracy; the device can produce ± 10 angles.
• Electric cable in steel cover to protect wire from chips and prevent trouble with electric wires. - Halogen Light
- 4 Way Tool Holder
- Moving Splash Guard
- 4 Way Rapid Travel
- Coolant System
- Manufacturer
- Specifications
- Options/Accessories
- Steady Rest (2-3/4 " ~ 16-15/16") ............................ $ 6,000.00
- Steady Rest (11" ~ 23-1/2") ..................................... $ 7,700.00
- Steady Rest (23” ~34-5/8”) ….................................. $ 13,350.00
- Steady Rest (31-1/2” ~ 43-5/16”)............................. $ 20,000.00
- Taper Attachment…………....................................... $ 10,000.00
- Installation Taper Attachment .................................. $ 850.00
- Full Length Splash Guard 80" ................................. $ 2,150.00
- Full Length Splash Guard 120" ............................... $ 2,800.00
- Full Length Splash Guard 160" ............................... $ 3,500.00
- Full Length Splash Guard 200" ............................... $ 4,900.00
- Full Length Splash Guard 240" ............................... $ 6,250.00
- Spindle Bores 9”,10”,12”,14”,16”, 21” ………....…… $ P.O.R.
- Auto Rapid Threading Device…………………...…... $ P.O.R.
- Double Chuck Attachment……………...……………. $ P.O.R.
- Aloris Tool Post Set (DA) 5pc ..……………………… $ 2,150.00
- Newall Digital Read-Out-80"/100"/120"/160"/200"/240………………$ P.O.R.
- Custom Freight
ACRA 65" x 80" - 600" Heavy Duty Precision Gap Bed Engine Lathes 6500SHT
STANDARD EQUIPMENT:
ITEM: 65" x 80" - 600" Heavy Duty Precision Gap Bed Engine Lathes
MANUFACTURER: ACRA
MODEL: 6500SHT
Manufacturer:
ACRA
Lathes
Lathe Size:
65" x 80"+
Lathe Type:
Engine
Machine Type
Machine Category:
Lathes
Machine Sub-Category:
Gap Bed
MODEL
|
6580SHT |
65120SHT |
65160SHT |
|
CAPACITY
|
Swing Over Bed: |
64.96" |
||
Swing Over Cross Slide: |
53.14" |
|||
Swing In Gap: |
86.61" |
|||
Width of Gap: |
22" |
|||
Distance Between Centers |
80" |
120" |
160" |
|
Bed Width |
33" |
|||
HEADSTOCK
|
Spindle Nose: |
A2-15 |
||
Spindle Bore: |
6.02" |
|||
Taper of Spindle: |
MT NO.6 |
|||
Spindle Speeds – Range: |
4~400 RPM |
|||
CARRIAGE
|
Cross Slide Travel: |
31.49" |
||
Compound Slide Travel: |
16-1/2" |
|||
Rapid Travel Speed to Carriage: |
80" /minute |
|||
THREAD & FEEDS
|
Inch Threads: |
1/4 ~ 30 TPI |
||
Metric Threads: |
1 ~ 120 mm |
|||
Module Threads: |
0.25 ~ 30 mm |
|||
Diametrical Threads: |
1 ~ 120 D.P. |
|||
Longitudinal Feeds: |
0.004" ~ 0.40" /rev |
|||
Cross Feeds: |
0.002" ~ 0.20" /rev |
|||
TAILSTOCK
|
Quill Diameter: |
6" |
||
Quill Travel: |
13-3/8" |
|||
Quill Taper: |
MT NO.6 |
|||
POWER
|
Spindle Drive Motor: |
40 HP |
||
Voltage: |
230/460V AC/3PH |
|||
MEASUREMENT
|
Weight
|
30,000 lbs. |
33,500 lbs. |
37,000 lbs. |
Dimensions
|
228" x 90" 95" |
268" x 90" 95" |
308" x 90" 95" |
|
MODEL
| 65200SHT | 65240SHT | 65280SHT | |
CAPACITY
| Swing Over Bed: | 64.96" | ||
Swing Over Cross Slide: | 53.14" | |||
Swing In Gap: | 86.61" | |||
Width of Gap: | 22" | |||
Distance Between Centers | 200" | 240" | 280" | |
Bed Width | 33" | |||
HEADSTOCK
| Spindle Nose: | A2-15 | ||
Spindle Bore: | 6.02" | |||
Taper of Spindle: | MT NO.6 | |||
Spindle Speeds – Range: | 4~400 RPM | |||
CARRIAGE
| Cross Slide Travel: | 31.49" | ||
Compound Slide Travel: | 16-1/2" | |||
Rapid Travel Speed to Carriage: | 80" /minute | |||
THREAD & FEEDS
| Inch Threads: | 1/4 ~ 30 TPI | ||
Metric Threads: | 1 ~ 120 mm | |||
Module Threads: | 0.25 ~ 30 mm | |||
Diametrical Threads: | 1 ~ 120 D.P. | |||
Longitudinal Feeds: | 0.004" ~ 0.40" /rev | |||
Cross Feeds: | 0.002" ~ 0.20" /rev | |||
TAILSTOCK
| Quill Diameter: | 6" | ||
Quill Travel: | 13-3/8" | |||
Quill Taper: | MT NO.6 | |||
POWER
| Spindle Drive Motor: | 40 HP | ||
Voltage: | 230/460V AC/3PH | |||
MEASUREMENT
| Weight
| 40,560 lbs. | 44,080 lbs. | 47,600 lbs. |
Dimensions
| 348" x 90" 95" | 388" x 90" 95" | 428" x 90" 95" | |
MODEL
| 65320SHT | 65360SHT | 65400SHT | 65480SHT | |
CAPACITY
| Swing Over Bed: | 64.96" | |||
Swing Over Cross Slide: | 53.14" | ||||
Swing In Gap: | 86.61 | ||||
Width of Gap: | 22" | ||||
Distance Between Centers | 320" | 360" | 400" | 480" | |
Bed Width | 33" | ||||
HEADSTOCK
| Spindle Nose: | A2-15 | |||
Spindle Bore: | 6.02" | ||||
Taper of Spindle: | MT NO.6 | ||||
Spindle Speeds – Range: | 4~400 RPM | ||||
CARRIAGE
| Cross Slide Travel: | 31.49" | |||
Compound Slide Travel: | 16-1/2" | ||||
Rapid Travel Speed to Carriage: | 80" /minute | ||||
THREAD & FEEDS
| Inch Threads: | 1/4 ~ 30 TPI | |||
Metric Threads: | 1 ~ 120 mm | ||||
Module Threads: | 0.25 ~ 30 mm | ||||
Diametrical Threads: | 1 ~ 120 D.P. | ||||
Longitudinal Feeds: | 0.004" ~ 0.40" /rev | ||||
Cross Feeds: | 0.002" ~ 0.20" /rev | ||||
TAILSTOCK
| Quill Diameter: | 6" | |||
Quill Travel: | 13-3/8" | ||||
Quill Taper: | MT NO.6 | ||||
POWER
| Spindle Drive Motor: | 40 HP | |||
Voltage: | 230/460V AC/3PH | ||||
MEASUREMENT
| Weight
| 51,120 lbs. | 54,600 lbs. | 58,160 lbs. | 61,720 lbs. |
Dimensions
| 468" x 95" 100" | 468" x 95" 100" | 508" x 95" 100" | 548" x 95" 100" | |
MODEL | 65560SHT | 65600SHT | |
CAPACITY | Swing Over Bed: | 64.96" | |
Swing Over Cross Slide: | 53.14" | ||
Swing In Gap: | 86.61" | ||
Width of Gap: | 22" | ||
Distance Between Centers | 560" | 600" | |
Bed Width | 33" | ||
HEADSTOCK | Spindle Nose: | A2-15 | |
Spindle Bore: | 6.02" | ||
Taper of Spindle: | MT NO.6 | ||
Spindle Speeds – Range: | 4~400 RPM | ||
CARRIAGE | Cross Slide Travel: | 31.49" | |
Compound Slide Travel: | 16-1/2" | ||
Rapid Travel Speed to Carriage: | 80" /minute | ||
THREAD & FEEDS | Inch Threads: | 1/4 ~ 30 TPI | |
Metric Threads: | 1 ~ 120 mm | ||
Module Threads: | 0.25 ~ 30 mm | ||
Diametrical Threads: | 1 ~ 120 D.P. | ||
Longitudinal Feeds: | 0.004" ~ 0.40" /rev | ||
Cross Feeds: | 0.002" ~ 0.20" /rev | ||
TAILSTOCK | Quill Diameter: | 6" | |
Quill Travel: | 13-3/8" | ||
Quill Taper: | MT NO.6 | ||
POWER | Spindle Drive Motor: | 40 HP | |
Voltage: | 230/460V AC/3PH | ||
MEASUREMENT | Weight
| 65,280 lbs. | 68,840 lbs. |
Dimensions
| 588" x 95" x 100" | 628" x 95" x 100" | |
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
